Saltar al contenido
MilliporeSigma
Todas las fotos(3)

Key Documents

View All Documentation

719781

Sigma-Aldrich

Carbon nanofibers

greener alternative

graphitized (iron-free), composed of conical platelets, D × L 100 nm × 20-200 μm

Sinónimos:

PR-25-XT-HHT, Conical carbon nanofibers

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(3)

About This Item

Fórmula empírica (notación de Hill):
C
Peso molecular:
12.01
MDL number:
MFCD00133992
UNSPSC Code:
12352103
PubChem Substance ID:
329763680
NACRES:
NA.23

Quality Level

200

form

powder

greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

D × L

100 nm × 20-200 μm

surface area

24 m2/g

impurities

iron-free
<100 ppm Iron content

average diameter

130 nm

pore size

0.075 cm3/g average pore volume
124 Å average pore diameter

mp

3652-3697 °C

density

1.9 g/mL at 25 °C

bulk density

0.5‑3.5 lb/cu.ft

greener alternative category

Enabling,

InChI

1S/C

InChI key

OKTJSMMVPCPJKN-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Carbon nanofibers are ideal materials due to its impressive material properties such as mechanical strength, thermal and electrical conductivity. Click here for more information.

Application

Carbon nanofibers (CNFs) are carbon based nanostructures that can be used for a variety of applications such as tissue engineering, lithium based batteries, supercapacitors, and solar desalinations.

Preparation Note

Produced by Floating Catalyst Vapor-Grown Method.

Legal Information

Product of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.

pictograms

Exclamation mark
GHS07

signalword

Warning

hcodes

H319,H335

Hazard Classifications

Eye Irrit. 2 - STOT SE 3

target_organs

Respiratory system

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCP9188
MKCL9194
MKCK1262
MKCH2618
MKCG8064

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Effect of carbon nanofibers on electrode performance of symmetric supercapcitors with composite alpha-MnO2 nanorods
Rao TP, et al.
Journal of alloys and compounds, 789(14), 518-527 (2019)
Electrically conductive chitosan/carbon scaffolds for cardiac tissue engineering
Martins AM, et al.
Biomacromolecules, 15(2), 635-643 (2014)
CNFs/S 1-x Se x Composites as Promising Cathode Materials for High-Energy Lithium-Sulfur Batteries
Pandey GP, et al.
MRS Advances, 4(14), 821-828 (2019)
Novel draw solution for forward osmosis based solar desalination
Amjad M, et al.
Applied Energy, 230(14), 220-231 (2018)
Antoine P Pagé et al.
PloS one, 10(7), e0132062-e0132062 (2015-07-15)
The objectives of this study were to uncover Salix purpurea-microbe xenobiotic degradation systems that could be harnessed in rhizoremediation, and to identify microorganisms that are likely involved in these partnerships. To do so, we tested S. purpurea's ability to stimulate
Ver todos los artículos relacionados

Artículos

Carbon Nanofiber Applications & Properties

Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials termed multi-walled carbon nanotubes (MWCNTs), and are produced by the floating catalyst method.

Lightweight Metal Matrix Nanocomposites - Stretching the Boundaries of Metals

Composite materials that traditionally incorporate micron scale reinforcements in a bulk matrix offer opportunities to tailor material properties such as hardness, tensile strength, ductility, density, thermal and electrical conductivity, and wear resistance.

3D Printing of Carbon Fiber-Reinforced Composites

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries.

Contenido relacionado

Tissue Engineering

Tissue engineering fabricates tissues cultures from scaffolds, living cells, and biologically active molecules by simulating the microenvironment of the body to repair or replace damaged tissue.

Ingeniería de tejidos

En la ingeniería de tejidos se fabrican cultivos de tejidos a partir de armazones, células vivas y moléculas biológicamente activas simulando el microentorno del organismo para reparar o sustituir tejido dañado.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico