Saltar al contenido
MilliporeSigma
Todas las fotos(2)

Key Documents

View All Documentation

695890

Sigma-Aldrich

Phosphoric acid 2-hydroxyethyl methacrylate ester

contains 700-1000 ppm monomethyl ether hydroquinone, 90%

Sinónimos:

2-Hydroxyethyl methacrylate phosphate

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Fórmula lineal:
C6H10O3 · xH3PO4
Número de CAS:
52628-03-2
UNSPSC Code:
12162002
NACRES:
NA.23

description

~25% diester content

Quality Level

100

assay

90%

form

liquid

contains

700-1000 ppm monomethyl ether hydroquinone

refractive index

n20/D 1.4688

density

1.37 g/mL at 25 °C

storage temp.

2-8°C

InChI

1S/C6H10O3.H3O4P/c1-5(2)6(8)9-4-3-7;1-5(2,3)4/h7H,1,3-4H2,2H3;(H3,1,2,3,4)

InChI key

POLZHVHESHDZRD-UHFFFAOYSA-N

General description

Phosphoric acid 2-hydroxyethyl methacrylate ester is a phosphoric acid based ester which is composed of phosphoric acid monomer and diethyl methacrylate. It can be used as a chelating absorbent due to its high affinity towards metal ions.

Application

Phosphoric acid 2-hydroxyethyl methacrylate ester is used in surface functionalization of polytetrafluoroethylene (PTFE) for craniofacial applications.

pictograms

CorrosionExclamation mark
GHS05,GHS07

signalword

Danger

Hazard Classifications

Acute Tox. 4 Oral - Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3

target_organs

Respiratory system

Storage Class

8A - Combustible corrosive hazardous materials

wgk_germany

WGK 3

flash_point_f

293.0 °F - open cup

flash_point_c

145 °C - open cup

ppe

Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCQ8440
MKCN0327
MKCL1600
MKCF5587
MKCD3693

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel
Hayakawa T, et al.
Dental Materials : Official Publication of the Academy of Dental Materials, 14(2), 99-105 (1998)
Rapid removal of arsenic (V) by zirconium (IV) loaded phosphoric chelate adsorbent synthesized by radiation induced graft polymerization
Seko N, et al.
Reactive and Functional Polymers, 59(3), 235-241 (2004)
K de Groot et al.
Journal of dental research, 59(9), 1493-1496 (1980-09-01)
The mechanical properties of two commercially available dental cements, a zinc phosphate cement and a carboxylate cement, were substantially improved by adding a polymeric phosphate acid to the cement liquids. The improvements can be explained in terms of the change
Ryoko Iwata et al.
Colloids and surfaces. B, Biointerfaces, 62(2), 288-298 (2007-12-07)
Well-defined polymer brushes and block copolymer brushes consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and glycidyl methacrylate (GMA) were prepared by surface-initiated atom transfer radical polymerization (ATRP). The polymer brushes were used for the immobilization of antibody fragments in a defined orientation.
Shuko Suzuki et al.
Biomaterials, 26(26), 5303-5312 (2005-04-09)
The bioactivity of three methacryloyloxyethyl phosphate (MOEP) grafted expanded polytetrafluoroethylene (ePTFE) membranes with varying surface coverage as well as unmodified ePTFE was investigated through a series of in vitro tests: calcium phosphate (CaP) growth in simulated body fluid (SBF), serum
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico