推薦產品
等級
ACS reagent
puriss. p.a.
品質等級
agency
reag. Ph. Eur.
蒸汽密度
>1 (vs air)
蒸汽壓力
<18 mmHg ( 20 °C)
3 mmHg ( 37 °C)
化驗
≥98%
形狀
pellets
技術
titration: suitable
雜質
≤0.0003% total nitrogen (N)
≤0.002% heavy metals (as Ag)
≤1.0% Na2CO3
≤5 ppm heavy metals (as Pb)
mp
318 °C (lit.)
溶解度
water: soluble 1260 g/L at 20 °C
密度
2.13 g/cm3
負離子痕跡
chloride (Cl-): ≤10 ppm
phosphate (PO43-): ≤0.0005%
silicate (as SiO2): ≤0.001%
sulfate (SO42-): ≤30 ppm
正離子痕跡
Al: ≤0.0005%
As: ≤0.0001%
Ca: ≤0.0005%
Cu: ≤0.0005%
Fe: ≤5 ppm
Hg: ≤0.05 ppm
K: ≤0.02%
Mg: ≤0.0005%
Ni: ≤0.0005%
Pb: ≤0.0002%
Zn: ≤0.0005%
SMILES 字串
[OH-].[Na+]
InChI
1S/Na.H2O/h;1H2/q+1;/p-1
InChI 密鑰
HEMHJVSKTPXQMS-UHFFFAOYSA-M
尋找類似的產品? 前往 產品比較指南
一般說明
Sodium hydroxide is an inorganic base. It participates in the oxidation of glycerol, catalyzed by Au/charcoal or Au/graphite. It also participates in solvent-free aldol condensation reaction.
應用
Sodium hydroxide may be employed for determination of specific surface area of colloidal silica, via titration. It may be employed for direct oxidation of sodium borohydride, which was investigated by cyclic and linear voltammetry, chronoamperometry and chronopotentiometry. It may be used to compose citrate buffer and borate buffers.
It may be used in the synthesis of following compounds:
It may be used in the synthesis of following compounds:
- alkylaryl amidosulfobetaines
- (3 -[4-teroctylphenoxyethoxyethoxyethyl] dimethylammonio propane sulfonate (XOSB)
- trisulfobetaines (TriSBn)
訊號詞
Danger
危險聲明
危險分類
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
儲存類別代碼
8A - Combustible corrosive hazardous materials
水污染物質分類(WGK)
WGK 1
閃點(°F)
Not applicable
閃點(°C)
Not applicable
Chemical communications (Cambridge, England), (7)(7), 696-697 (2002-07-18)
Glycerol is oxidised to glyceric acid with 100% selectivity using either 1% Au/charcoal or 1% Au/graphite catalyst under mild reaction conditions (60 degrees C, 3 h, water as solvent).
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務