跳轉至內容
Merck
全部照片(1)

Key Documents

MFSL06ST3

Millipore

Durapore® 5.0 µm, Millipak® Final Fill Capsule

Millipak® Final Fill 60, sterile; γ-irradiated

登入查看組織和合約定價


About This Item

分類程式碼代碼:
23151806

材料

polysulfone device
polysulfone support

品質等級

agency

meets EP 2.6.14
meets JP 4.01
meets USP 85

無菌

irradiated
sterile; γ-irradiated

產品線

Millipak® Final Fill 60

特點

hydrophilic

製造商/商標名

Millipak®

參數

10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse)
4.5 L/min flow rate at 0.69 bar (ΔP)
5.5 bar max. inlet pressure (80 psi) at 25 °C
60 L process volume
80 psi max. differential pressure (5.5 bar) at 25 °C (Forward)

技術

prefiltration: suitable

過濾器過濾面積

300 cm2

雜質

<0.25 EU/mL USP bacterial endotoxins (LAL test, per device; aqueous extraction)
<0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction)

基質

Durapore®

孔徑

5.0 μm pore size

起泡點

≥2 psi (138 mbar), air with water

接頭

(38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)

尋找類似的產品? 前往 產品比較指南

一般說明

Device Configuration: Cartridge

包裝

Double Easy-Open bag

準備報告

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ≤40  kGy gamma exposure.

This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

其他說明

Directions for Use
  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer general guidelines section of user guide shipped with this product
  • Storage Statement: Please refer user guide shipped with this product
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

法律資訊

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

未找到適合的產品?  

試用我們的產品選擇工具.


分析證明 (COA)

輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。

已經擁有該產品?

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務