推薦產品
描述
Sheet resistivity: <0.010 Ω/sq/mil (150°C/10 min)
Solid content: 82-85% (120 °C)
Volume resistivity: <2.5x10-5 Ω.cm (150°C/30 min)
形狀
liquid
黏度
45-55 Pa.s
儲存溫度
2-8°C
一般說明
SunTronic Conductive Silver Ink AST6025 is a screen printable conductive ink specifically designed for printing fine line and fine pitch conductive traces.
The ink exhibits high viscosity, low slumping, excellent conductivity and environmental stability, and adhesion to various substrates, including glass, various metals, PET, and transparent conductive films.
AST6025 is specifically suitable for printing of fine interconnects, printed RF antennae, and bus bars for touch panels.
The ink exhibits high viscosity, low slumping, excellent conductivity and environmental stability, and adhesion to various substrates, including glass, various metals, PET, and transparent conductive films.
AST6025 is specifically suitable for printing of fine interconnects, printed RF antennae, and bus bars for touch panels.
注意
DRYING
Typical drying temperature may range from 120-200°C (248-392°F) depending on temperature tolerance of the substrate.Drying time may range from 2-30 minutes.Higher drying temperature and/or longer drying times will result in better electrical performance, adhesion and mechanical properties.
Optimum drying conditions should be established for particular equipment used by the customer.
Typical drying temperature may range from 120-200°C (248-392°F) depending on temperature tolerance of the substrate.Drying time may range from 2-30 minutes.Higher drying temperature and/or longer drying times will result in better electrical performance, adhesion and mechanical properties.
Optimum drying conditions should be established for particular equipment used by the customer.
PRINTING
AST6025 is supplied as ready-to-use ink. It should be stirred well prior to printing. AST6025 is suitable for use on hand, semi-automatic or fully automatic screen printing machines.
Typically, polyester or stainless screens with mesh count 325-430 threads/inch can be used depending on desired ink film thickness and resolution. For fine lines between 100 - 250 microns nominal line width, stainless screen mesh is preferred with mesh count between 325-400 threads/inch. For <100 microns line widths, 430 and higher stainless steel mesh counts are recommended.
AST6025 is supplied as ready-to-use ink. It should be stirred well prior to printing. AST6025 is suitable for use on hand, semi-automatic or fully automatic screen printing machines.
Typically, polyester or stainless screens with mesh count 325-430 threads/inch can be used depending on desired ink film thickness and resolution. For fine lines between 100 - 250 microns nominal line width, stainless screen mesh is preferred with mesh count between 325-400 threads/inch. For <100 microns line widths, 430 and higher stainless steel mesh counts are recommended.
法律資訊
SunTronic is a registered trademark of Sun Chemical, Inc.
訊號詞
Danger
危險分類
Aquatic Acute 1 - Aquatic Chronic 1 - Carc. 2 - Eye Dam. 1
儲存類別代碼
10 - Combustible liquids
水污染物質分類（WGK）
WGK 3
閃點（°F）
212.0 °F
閃點（°C）
100 °C
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號，寫有 ‘Lot’或‘Batch’.。
客戶也查看了
文章
Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務