推荐产品
材料
PTFE membrane
polypropylene housing
無菌
non-sterile
產品線
Millex®
特點
holdup volume≤ 80 μL (after air purge)
hydrophilic
製造商/商標名
Millex®
參數
45 °C max. temp.
8.6 bar max. inlet pressure (125 psi)
技術
LC/MS: suitable
UHPLC-MS: suitable
UHPLC: suitable
analytical sample preparation: suitable
mass spectrometry (MS): suitable
高度
27 mm
直徑
33 mm
過濾面積
4.5 cm2
容積
100 mL
顏色
light blue
孔徑
0.20 μm
輸入
sample type organic solution(s)
sample type aqueous solution(s)
起泡點
≥1.6 bar, air with water at 23 °C
接頭
female Luer-Lok® inlet
male Luer outlet slip
一般說明
SLLG033NS 替换 SLLGH25NS
SLLG033NB 替换 SLLGH25NB
SLLG033NK 替换 SLLGH25NK
带亲水性 PTFE 未灭菌 Millex 针头式过滤器概述
- 溶出物含量最低,优化UHPLC和LC-MS等灵敏分析的背景水平
- 水溶液或有机溶液的过滤
- 聚丙烯外壳材料具有溶出物含量低,化学相容性广的特点。
应用范围:
进行 UHPLC、HPLC、LC-MS 和质谱分析之前的样品过滤;溶剂过滤;水溶液和有机溶液的过滤
應用
包裝
規格
外觀
法律資訊
推薦
相關產品
商品
Syringe membrane filter selection and validation methods to assess analyte loss due to membrane filter adsorption in pharmaceutical quality control (QC) testing.
Syringe membrane filter selection and validation methods to assess analyte loss due to membrane filter adsorption in pharmaceutical quality control (QC) testing.
Filtration is used in dissolution testing to end the dissolution process and prepare the sample for HPLC analysis. This page discusses the importance of filtration and utility of hydrophilic PTFE Millex® syringe filters in dissolution testing.
Filtration is used in dissolution testing to end the dissolution process and prepare the sample for HPLC analysis. This page discusses the importance of filtration and utility of hydrophilic PTFE Millex® syringe filters in dissolution testing.
实验方案
HPLC separation of 17 important cannabinoids including CBD, delta 9 THC and THCA. Read the application note
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门