추천 제품
product name
Tetrahydrofuran, ACS reagent, ≥99.0%, contains 250 ppm BHT as inhibitor
Grade
ACS reagent
Quality Level
vapor density
2.5 (vs air)
vapor pressure
114 mmHg ( 15 °C)
143 mmHg ( 20 °C)
분석
≥99.0%
형태
liquid
autoignition temp.
610 °F
포함
250 ppm BHT as inhibitor
expl. lim.
1.8-11.8 %
기술
HPLC: suitable
불순물
≤0.015% peroxide (as H2O2)
≤0.05% water
증발 잔류물
≤0.03%
색상
APHA: ≤20
refractive index
n20/D 1.407 (lit.)
pH
~7
bp
65-67 °C (lit.)
mp
−108 °C (lit.)
density
0.889 g/mL at 25 °C (lit.)
SMILES string
C1CCOC1
InChI
1S/C4H8O/c1-2-4-5-3-1/h1-4H2
InChI key
WYURNTSHIVDZCO-UHFFFAOYSA-N
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
Tetrahydrofuran (THF) is a heterocyclic compound (cyclic ether). It is colorless, has low viscosity, and good solubility in a wide range of solvents. It is widely used as a solvent in organic synthesis, being very popular in reactions with organometallic compounds and Grignard reagents. Due to organic peroxides formation on long term storage, THF is usually stabilized by adding butylated hydroxytoluene (BHT). BHT removes the free radicals required for the peroxide formation.
애플리케이션
Tetrahydrofuran (THF) is used as a solvent in the following processes:
b) Organometallic compounds
c) Reformatsky
d) Lithiation
e) Hydride reduction
f) Metal-catalyzed coupling (Heck, Stile, Suzuki)
g) Lewis acid mediated reactions
- Organic synthesis
b) Organometallic compounds
c) Reformatsky
d) Lithiation
e) Hydride reduction
f) Metal-catalyzed coupling (Heck, Stile, Suzuki)
g) Lewis acid mediated reactions
- Crystallization
- Polymerization. Ex. RAFT (Reversible Addition-Fragmentation Chain Transfer) polymerization of p-acetoxystyrene
- Coatings
- As an O-donor ligand to form coordination complexes
- As mobile phase solvent in high-performance liquid chromatography
특징 및 장점
ACS solvents meet or exceed the high standards of the American Chemical Society (ACS) ,with test specifications that are specialized to every compound. According to the American Chemical Society, ACS reagent grade implies that it is a substance of sufficient purity to be used in most chemical analyses or reactions.
관련 제품
제품 번호
설명
가격
신호어
Danger
유해 및 위험 성명서
Hazard Classifications
Acute Tox. 4 Oral - Carc. 2 - Eye Irrit. 2 - Flam. Liq. 2 - STOT SE 3
표적 기관
Respiratory system
보충제 위험성
Storage Class Code
3 - Flammable liquids
WGK
WGK 1
Flash Point (°F)
-6.2 °F - closed cup
Flash Point (°C)
-21.2 °C - closed cup
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
이미 열람한 고객
Journal of polymer science. Part A, Polymer chemistry, 48(12), 2517-2524 (2010-07-27)
The kinetics of the RAFT polymerization of p-acetoxystyrene using a trithiocarbonate chain transfer agent, S-1-dodecyl-S'-(α,α'-dimethyl-α″-acetic acid)trithiocarbonate, DDMAT, was investigated. Parameters including temperature, percentage initiator, concentration, monomer-to-chain transfer agent ratio and solvent were varied and their impact on the rate of
1,3 Dioxolane versus tetrahydrofuran as promoters for CO2-hydrate formation: Thermodynamics properties, and kinetics in presence of sodium dodecyl sulfate.
Chemical Engineering Science, 126, 688-697 (2015)
Oxidation of tetrahydrofuran to butyrolactone catalyzed by iron-containing clay.
Green Chemistry, 17(1), 435-441 (2015)
An efficient and economical process for lignin depolymerization in biomass-derived solvent tetrahydrofuran.
Bioresource Technology, 154, 10-17 (2014)
Novel Diacetylinic Aryloxysilane Polymers: A New Thermally Cross-Linkable High Temperature Polymer System.
Macromolecules, 46(11), 4370-4377 (2013)
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.