PCC030C10G

Pellicon^® Capsule with Ultracel^® Membrane

pore size 30 kDa, C Screen, 1 m² manifold with AseptiQuik^® G connectors

• UNSPSC 코드: 41104903

속성

• material: EPDM rubber seal; PPO/PS blend housing; TPE seal; cellulose screen (Composite Regenerated); composite regenerated cellulose (CRC) membrane; epoxy adhesive; epoxy device (Potting, BPA-free); polyester screen; polypropylene screen; polyurethane adhesive; polyurethane device (Pottin)
• Quality Level: 400
• 설명: C Screen, 1 m² manifold with AseptiQuik^® G connectors
• 무균: sterile; γ-irradiated
• 특징: holdup volume 254 mL (in feed channel); holdup volume 306 mL (in permeate channel)
• 파라미터: max. inlet pressure at 75 psi (5.1 bar) and 4-30 °C; max. transmembrane pressure at 50 psi (3.5 bar) and 4-30 °C; 4-8 L/min-m² flow rate
• 기술: ultrafiltration: suitable
• capsule L × W × H: 19.56 cm (7.7 in.) × 34.37 cm (13.53 in.) × 40.46 cm (15.93 in.)
• 멤브레인 면적: 1 m²
• screen H: 15.9 in. (40.5 cm)
• screen L: 7.7 in. (19.6 cm) , Length
• screen W: 13.5 in. (34.4 cm)
• 불순물: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• 기질: Ultracel^®
• 공극 크기: 30 kDa
• pH 범위: 2-13
• 피팅: inlet/outlet connection (Feed: AseptiQuik^® G Connector); inlet/outlet connection (Permeate: AseptiQuik^® G Connector); inlet/outlet connection (Retentate: AseptiQuik^® G Connector)
• 저장 온도: 15-25°C

설명

일반 설명

The Pellicon^® Capsule with Ultracel Membrane is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied gamma sterilized with preservative-free reverse osmosis water. This new addition to the Pellicon^® family shares the same unbeatable performance of Pellicon^® cassettes featuring C Screen, 1 m² manifold with AseptiQuik^® G connectors. This device is linearly scalable, making it easy to transition between both formats.

Pellicon^® Capsules are ideal for the filtration of solutions that require single-use capabilities, including:

-Rapid batch turnaround for higher plant productivity
-Lower risks of product cross-contamination
-Self-contained device for increased operator safety
-Process flexibility for multi-product manufacturing facilities
-Optimum use of time and resources from minimal device preparation

Membrane

Pellicon^® Capsules with Ultracel membrane are designed for excellent product retention, recovery, and high yields. Ultracel void-free composite membranes combine ultra-low protein binding, low fouling, and organic solvent resistance with superb mechanical strength.

애플리케이션

Concentration, Diafiltration, Buffer exchange, Protein purification

특징 및 장점

• Plug ′n play, holderless design - easy to install, safe to remove
• Gamma Sterilized and preseravtive-free - ready to process in minutes
• True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
• Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
• Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

포장

A foam pouch is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is then placed on a tray and individually boxed.

호환성

Screen Type: Type C screen (coarse screen)

기타 정보

The Emprove^® Program complements the product portfolio through

• Comprehensive documentation to support qualification, risk assessment and process optimization needs.
• Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
• Convenient 24/7 access to up-to-date product information.

법적 정보

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany