D003F3P01

Clarigard^® Cartridge Filter

nominal pore size 0.3 μm, cartridge nominal length × diam. 30 in. (747.5-752.5 mm) × 2.75 in. (70 mm)

• UNSPSC 코드: 23151806

속성

• material: polypropylene filter
• Quality Level: 400
• 특징: hydrophilic
• 제조업체/상표: Clarigard^®
• 파라미터: 4.8 bar max. differential pressure (70 psid) at 20 °C
• cartridge nominal length × diam.: 30 in. (747.5-752.5 mm) × 2.75 in. (70 mm)
• 불순물: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• 중량 추출물: ≤10 mg
• 공극 크기: 0.3 μm nominal pore size; 0.3 μm pore size
• 입력: sample type liquid
• 카트리지 코드: Code F (Double Open End Flat Gasket)

설명

일반 설명

Clarigard^® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.

제조 메모

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

분석 메모

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.

기타 정보

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioborden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartidges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

법적 정보

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany