CGW173S03

Polysep^™ II 1.0/0.2/0.1 µm nominal, Cartridge

pore size 1.0/0.2/0.1 μm, cartridge nominal length 30 in. (75 cm)

• 동의어(들): Polysep II Cartridge Filter 30 in. 1.0/0.2/0.1 μm Code 7
• UNSPSC 코드: 23151806
• eCl@ss: 32031610

속성

• material: borosilicate glass fiber (BGF) membrane; mixed cellulose esters (MCE) membrane; polypropylene ; polypropylene support (Spun bonded); silicone seal
• Quality Level: 400
• 규정 준수: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 무균: non-sterile
• 멸균 적합성: autoclavable compatible; steam-in-place compatible
• 제품 라인: Polysep^™
• 특징: hydrophilic
• 제조업체/상표: Polysep^™
• 파라미터: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• 기술: prefiltration: suitable
• 길이: 30 in.
• 너비: 2.7 in.
• 카트리지 공칭 길이: 30 in. (75 cm)
• 직경: 7.1 cm (2.8 in.)
• 여과 면적: 1.26 m²
• 불순물: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• 중량 추출물: ≤420 mg/cartridge
• 기질: Polysep^™ II
• pore size: 1.0/0.2/0.1 μm nominal pore size; 1.0/0.2/0.1 μm pore size
• 입력: sample type liquid
• 카트리지 코드: Code 7

설명

일반 설명

Device Configuration: Cartridge

특징 및 장점

Format: Triple Layer

포장

Double Easy-Open bag

기타 정보

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

제조 메모

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

분석 메모

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

법적 정보

Polysep is a trademark of Sigma-Aldrich Co. LLC

안전성 정보

• 픽토그램: GHS02
• 신호어: Danger
• 유해 및 위험 성명서: H228
• 예방조치 성명서: P210 - P240 - P241 - P280 - P370 + P378
• Hazard Classifications: Flam. Sol. 1
• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 2