콘텐츠로 건너뛰기
Merck
모든 사진(1)

Key Documents

902497

Sigma-Aldrich

Polymer dielectric grey for screen printing

greener alternative

동의어(들):

D2070423P5, Dielectric ink, Dielectric paste

로그인조직 및 계약 가격 보기


About This Item

UNSPSC 코드:
12162002
NACRES:
NA.23

설명

Coverage: 305 cm2 per g (using a 230 mesh stainless steel screen with 13 micron emulsion)
Solvent Resistance: THF − Attack
Solvent Resistance: Acetone − Attack
Solvent Resistance: DMAC − Attack
Solvent Resistance: DMF− Attack
Solvent Resistance: MEK − Full attack

형태

paste

구성

Solid content, 50-55% (at 150 °C)

환경친화적 대안 제품 특성

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

점도

12.0-16.0 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25 °C)

환경친화적 대안 카테고리

일반 설명

This product is grey colored screen printable polymer dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.

애플리케이션

Polymer dielectric grey for screen printing can be used for a variety of applications such as ink in the design of MRI receiving coils, organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs).

특징 및 장점

The formulation is designed for maximum flexibility.

제조 메모

Screen Printing Equipment: semi-automatic, automatic.
Ink Screen Life: >3 hours
Screen Types: stainless steel, polyester mesh 156-325 tpi
  • Typical Drying Conditions: Dry at 80 °C for 30 minutes, or 130 °C for 10-15 minutes in a box oven
  • Suitable for Jet drying, infra-red and drying in high speed
  • reel-to-reel
Clean Up Solvent: ethoxy propanol or sericol
Substrate: polyester, PVC, polycarbonate, ceramic or alumina

법적 정보

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

픽토그램

Exclamation mark

신호어

Warning

유해 및 위험 성명서

Hazard Classifications

Eye Irrit. 2

Storage Class Code

10 - Combustible liquids

WGK

WGK 3

Flash Point (°F)

191.3 °F

Flash Point (°C)

88.5 °C


시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

A printed OTFT-backplane for AMOLED display
Ryu GS, et al.
Organic Electronics, 14(4), 1218-1224 (2013)
Scientific importance, properties and growing applications of poly (3, 4-ethylenedioxythiophene)
Kirchmeyer S and Reuter K
Journal of Materials Chemistry, 15(21), 2077-2088 (2005)
Screen-printed flexible MRI receive coils
Corea JR, et al.
Nature Communications, 7, 10839-10839 (2016)

문서

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.