콘텐츠로 건너뛰기
Merck
모든 사진(1)

주요 문서

753955

Sigma-Aldrich

ICBA

99% (HPLC)

동의어(들):

1′,1′′,4′,4′′-Tetrahydro-di[1,4]methanonaphthaleno[1,2:2′,3′,56,60:2′′,3′′][5,6]fullerene-C60, C60 derivative, indene-C60 bisadduct

로그인조직 및 계약 가격 보기


About This Item

실험식(Hill 표기법):
C78H16
CAS Number:
Molecular Weight:
952.96
MDL number:
UNSPSC 코드:
12352103
NACRES:
NA.23

Quality Level

분석

99% (HPLC)

양식

solid

손실

0.5 wt. % TGA, 235 °C

mp

253-260 °C

오비탈 에너지

LUMO 3.67 eV (CV)

OPV 기기 성능

ITO/PEDOT:PSS/P3HT: ICBA (1:1)/Al

  • Short-circuit current density (Jsc): 10.82 mA/cm2
  • Open-circuit voltage (Voc): 0.78 V
  • Fill Factor (FF): 0.56
  • Power Conversion Efficiency (PCE): 4.65 %

ITO/PEDOT:PSS/P3HT:ICBA(1.5:1)/LiF/Al
  • Short-circuit current density (Jsc): 10.53 mA/cm2
  • Open-circuit voltage (Voc): 0.83 V
  • Fill Factor (FF): 0.60
  • Power Conversion Efficiency (PCE): 5.26 %

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

ICBA is a C60 derivative that can be synthesized from C60 and indene. It is an acceptor material with shallow lowest occupied molecular orbital(LUMO) which can be used to enhance the performance of polymeric solar cells(PSCs).
The performance of indene-C60 bisadduct (ICBA) as organic solar cell (OSC) has been described in a study. Simple preparation and high solubility inorganic solvents renders ICBA as an efficient substitute to [6,6]-phenyl-C61 butyric acid methyl ester (PCBM).

애플리케이션

A ternary bulk heterojunction system (BHJ) may be fabricated with ICBA low band gap polymer, for IR sensitized organic solar cells. 1-3ICBA/thiazolo-thiazolo donor polymer blend may be used to enhance the charge generation in BHJ solar cells.
ICBA can be used with poly(3-hexylthiophene)(P3HT) as an active layer which can be used in the fabrication of organic solar cells(OSCs).ICBA in combination with thiazolo-thiazolo can be used as a donor. It can be blended with PCBM for photovoltaic based application.

픽토그램

Exclamation mark

신호어

Warning

유해 및 위험 성명서

Hazard Classifications

Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3

표적 기관

Respiratory system

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable


가장 최신 버전 중 하나를 선택하세요:

시험 성적서(COA)

Lot/Batch Number

적합한 버전을 찾을 수 없으신가요?

특정 버전이 필요한 경우 로트 번호나 배치 번호로 특정 인증서를 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

Temperature dependence of P3HT: ICBA polymer solar cells.
2017 International Conference on Numerical Simulation of Optoelectronic Devices, 133-134 (2017)
Photo-physics of PTB7, PCBM and ICBA based ternary solar cells.
Sharma R, et al.
Organic Electronics, 34(4), 111-117 (2016)
Comparative study of spectral and morphological properties of blends of P3HT with PCBM and ICBA.
Lin YH, et al.
Organic Electronics, 13(11), 2333-2341 (2012)

IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells
Ameri T, et al.
Energy & Environmental Science, 6 (2013)
Optimization of the structural configuration of ICBA/P3HT photovoltaic cells.
Nemnes GA, et al.
Applied Surface Science, 424(4), 264-268 (2017)

문서

Optoelectronic Devices Based on Diketopyrrolopyrrole (DPP)-containing Conjugated Small Molecules

Single-walled carbon nanotubes (SWCNTs) are promising materials for use in the active channel of field-effect transistors (FETs), photoabsorbing layers of solar cells and photodetectors because of their ultrafast charge transport mobility.

Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.

Solution-processed organic photovoltaic devices (OPVs) have emerged as a promising clean energy generating technology due to their ease of fabrication, potential to enable low-cost manufacturing via printing or coating techniques, and ability to be incorporated onto light weight, flexible substrates.

모두 보기

Global Trade Item Number

SKUGTIN
753955-250MG4061832988160

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.