Poly(3,4-ethylenedioxythiophene)-block-poly(ethylene glycol) solution

Name: Poly(3,4-ethylenedioxythiophene)-<I>block</I>-poly(ethylene glycol) solution
Brand: ALDRICH

1 wt % dispersion in nitromethane, contains p-toluenesulfonate as dopant

동의어(들):

Aedotron^™ P-NM, PEDOT-block-PEG, PEDOT-b-PEG

로그인조직 및 계약 가격 보기

모든 사진(1)

About This Item

MDL number:

MFCD06798808

UNSPSC 코드:

12352103

포함

p-toluenesulfonate as dopant

농도

1 wt % dispersion in nitromethane

작업 기능

4.19 eV

전도도

10^-4-10^-3 S/cm

density

1.127 g/mL at 25 °C

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

Please follow this link for Aedotron/Oligotron selection guide table.

애플리케이션

Conducting polymer. Useful as anti-static layers, hole-transport layers in OLED′s and various organic electronics applications (flexible circuits, capacitors, batteries).

Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.

주의사항

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.