WHA2108

Whatman^® PolyVENT and Sterivent intregal filters

Sterivent 150, inlet 1 1/2 inch Sanitary Outlet, outlet 1 1/2 inch Sanitary Outlet

• Synonym(s): Z741418
• UNSPSC Code: 41104922
• NACRES: NB.24

Properties

• material: PTFE membrane; polypropylene housing
• sterility: non-sterile
• manufacturer/tradename: Whatman 2108; Whatman Article No. 28418742 (US reference)
• packaging: 1 ea of
• diam.: 150 mm
• pore size: 0.2 μm
• fitting: inlet 1 1/2 inch Sanitary Outlet; outlet 1 1/2 inch Sanitary Outlet

Description

General description

GE′s Whatman PolyVENT filters are integral venting filters that work bidirectionally to prevent contaminants from entering vessels like fermentation tanks during draining or filling.

• 0.2 μm hydrophobic PTFE air filters are ideal industrial air filter media
• Validated for 50 steam autoclave cycles; compatible with ethylene oxide (EtO)
• Testable by water break through (WBT) test or bubble point testing
• Passes USP Class VI biosafety tests for plastics
• Manufactured in clean room facilities
• Range of filtration areas from 4–1000 cm² to support filtration volumes as small as one liter and as large as a large tank vessel

GE′s Whatman SteriVENT filters, venting filters with an integral PTFE membrane, are well suited for sterile venting of vessels and tanks during draining and filling.

• Hydrophobic 0.2 μm PTFE membrane makes SteriVENT a high-quality PTFE air filter
• Can be autoclaved 50 times without loss of performance; compatible with ethylene oxide (EtO)
• Integrity can be tested with the water break through (WBT) test
• Range from 16–2000 cm² of filtration area to support even large process tanks

Other Notes

Field of Use : For internal research use only. Products are not intended for diagnostic use or resale.

Legal Information

Whatman is a registered trademark of Cytiva