Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

1.50253

Supelco

Purospher® STAR RP-18 endcapped (5 µm) HPLC Columns

L × I.D. 125 mm x 3 mm LiChroCART HPLC cartridge, manuCART holder required for use

Sinonimo/i:

Purospher® STAR RP-18 endcapped (5 µm) LiChroCART 125-3

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Codice UNSPSC:
41115709
NACRES:
SB.52

product name

Purospher® STAR RP-18 endcapped (5 µm), L × I.D. 125 mm x 3 mm LiChroCART HPLC cartridge, manuCART holder required for use

Materiali

stainless steel column

Livello qualitativo

agenzia

suitable for USP L1

Nome Commerciale

Purospher®

Caratteristiche

endcapped

Confezionamento

1 ea of

Grado di funzionalizzazione

17% Carbon loading

Parametri

250 bar pressure
65 °C max. temp.

tecniche

HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)

Lungh. × diam. int. colonna

12.5 cm × 3 mm

Area superficiale

330 m2/g

Matrice

fully porous particle

Gruppo funzionale matrice

C18 bonding phase

Dimensione particelle

5 μm

Dimensione pori

120 Å pore size

operating pH range

1.5-10.5

Tecnica di separazione

reversed phase

Temperatura di conservazione

no temp limit

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Descrizione generale

Purospher® STAR RP-18 endcapped, 5 µm HPLC columns are designed for universal use and allow the separation of basic, neutral, and metal chelating compounds with simple mobile phases and excellent peak symmetry. They are based on ultra-pure fully porous silica particles (Type B). These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test. Purospher® STAR RP-18 endcapped, 5 µm LiChroCART 125-3 is a cartridge column which requires a manuCART cartridge column holder part number 1.51486.0001. The manuCART can be used to hold one cartridge column with or without direct integration of a 4-4 mm guard column. The recommended guard column is Purospher® STAR RP-18 endcapped (5 µm) LiChroCART 4-4 part number 1.50250.0001. LiChroCART cartridge columns mounted with a manuCART cartridge column holder are hand-tight only and have therefore a maximum pressure stability of 250 bar. For higher pressure stability requirements Purospher® STAR RP-18 endcapped, 5 µm Hibar® RT 125-3 HPLC columns are available part number 1.50615.0001.The column dimension of 125 mm length x 3 mm I.D. is the optimal choice for HPLC separation of complex samples at lower flow rate, allowing significant solvent savings and improved sensitivity. A 3 mm I.D. column enables a more sustainable separations in comparison to 4 or 4.6 mm I.D. column due to the use of less solvent for the chromatographic separation.Learn more about Purospher® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

Applicazioni

Intended to be used in the separation of aflatoxins, aldehydes, alkaloids, antibiotics, catecholamines, explosives, oligonucleotides, esters, fat soluble vitamins, lipids, fatty acids, flavonoids, ketones, nitrosamines, nucleosides, PAHs, PCBs, peptides, pesticides, phenols, phthalates, preservatives, steroids, metabolized steroids, sulfonamides, sweeteners, and water soluble vitamins.

Caratteristiche e vantaggi

  • Ultra-pure silica (99.999%) for excellent peak symmetry
  • High separation efficiency
  • Reproducible results from run-to-run and batch-to-batch
  • Best all-round performance according to Tanaka
  • Outstanding pH stability from pH 1.5 to 10.5
  • No phase collapse when using highly aqueous mobile phases
  • Good suitability for LC-MS applications

Risultati analitici

Pressure: ≤ 60 bar
Theoretical Plates (N/m) (Toluene): ≥ 80000
Symmetry (Toluene): 0.8 - 1.4
Capacity factor (Toluene): ≥ 1.5

Note legali

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany
LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany
MANUCART is a trademark of Merck KGaA, Darmstadt, Germany
Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany

Codice della classe di stoccaggio

11 - Combustible Solids


Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.