Z564141
Ace pressure filter reactor system
Jacketed, capacity 2 L
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Prodotti consigliati
Parametri
35 psi pressure (at 100°C)
Diam. int. × prof. corpo
130 mm × 180 mm
Capacità
2 L
Diam. int. flangia
100 mm
Raccordi
Ace-Thred
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
Take replacement CAPFE O-ring, Ace 7855-880.
Rugged heavy-wall reactors with a Schott flange with shallow O-ring groove at the top for connection to a jointed head with quick-release clamp. These complete bench top systems include all components required for operation except an IKA® stirrer motor, model RW 20.n, which is recommended for all reactor sizes. See the stirrer section for a listing of these products.
Choice of two models:
Pressure filter reactor - rated 35 psig @ 100°C, Ace Threds allow use of vacuum or pressure to drain liquid from reactor, 2 x #15 and 1 x #7 AceThreds on 60 mm head, 3 x #15 and 1 x #7 Ace Threds on 100 mm head
Jacketed pressure filter reactor - as above with jacket for heating or cooling reaction
Applications:
Both systems include:
Choice of two models:
Pressure filter reactor - rated 35 psig @ 100°C, Ace Threds allow use of vacuum or pressure to drain liquid from reactor, 2 x #15 and 1 x #7 AceThreds on 60 mm head, 3 x #15 and 1 x #7 Ace Threds on 100 mm head
Jacketed pressure filter reactor - as above with jacket for heating or cooling reaction
Applications:
- Oxidation/reduction reactions where the particulate can be drawn down to a filter cake
- Nanotechnology where the material must be contained and the filtrate is the actual product or nano-particle needed
- Simple Bioreactor as gases can be introduced through pressure head via a pressure or NPT fittings and tubing
- Paints/pigments other viscous solutions
Both systems include:
- Heavy-wall glass reactor body and head, CAPFE O-ring and SS quick-release clamp
- Ace Thred PTFE bottom filter adapter, o-ring, and filter support, PTFE thread adapter, o-ring and PTFE bottom valve. Dead space below frit is 4.5-5 mL liquid w/ water viscosity +/- 0.5 mL
- Non-flaking stir shaft bearing
- Glass stir shaft with PTFE agitator assembly
- Addition funnel
- West condenser
- Support package including holed plate, stand, chain clamp, and holder
- PTFE stoppers
- Chuck adapter for IKA stirrer motor
Note legali
IKA is a registered trademark of IKA-Werke GmbH & Co. KG
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Ci dispiace, ma al momento non ci sono COA disponibili online per questo prodotto.
Se ti serve aiuto, non esitare a contattarci Servizio Clienti
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.