Passa al contenuto
Merck
Tutte le immagini(5)

Key Documents

920967

Sigma-Aldrich

Monolayer hexagonal Boron Nitride (hBN) on copper foil

size 3 in. (3 in.) × 76 mm (76 mm)

Sinonimo/i:

Boronitrene, Hexagonal boron nitride monolayer, Single-layer hexagonal boron nitride, White graphene

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Formula condensata:
h-BN
Numero CAS:
Numero MDL:
NACRES:
NA.23

Descrizione

Bandgap: 5.97 eV
Monolayer h-BN
Raman Peak: 1370 /cm-1
h-BN Coverage: 100% with sporadic adlayers

Livello qualitativo

Misura

3 in. (3 in.) × 76 mm (76 mm)

Dimensione grani

>4 μm

InChI

1S/BN/c1-2
PZNSFCLAULLKQX-UHFFFAOYSA-N

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Descrizione generale

For all hBN-on-copper products, the displayed range represents electronic data that were obtained after transfer hBN to SiO2. Your own metrics will depend entirely on the transfer methods that you use, and the resultant quality of your transfers.

Applicazioni

Monolayer hexagonal boron nitride (h-BN), also known as “white graphene”, is a wide-bandgap 2D crystal (~6 eV that can be tuned to ~2 eV) with exceptional strength , large oxidation resistance at high temperatures , and optical functionalities.
Among its potential applications are:
  • Two-dimensional electronics
  • Nanophotonic and other optoelectronic devices †††
  • Quantum communication and information science
  • Aerospace industry
  • MEMS and NEMS
  • Micro-/nano- actuators
  • Insulating/transparent coatings

Nota sulla preparazione

Which side contains hBN? Both sides of the copper foil contain hBN. We primarily recommend that the customer only use the material on the top side (i.e. the side that has Kapton tape) because it is the only side that is guaranteed not to have been in physical contact with anything and therefore should not have any potential physical damage. However, the underside can be used if one is careful and doesn’t mind the damage potential.

Stoccaggio e stabilità

To ensure the maximum shelf life of your hBN sample, it is best stored under vacuum or in inert atmosphere (Argon or Nitrogen) conditions once the vacuum sealed package has been opened.

Substrati

3” x 3” h-BN/copper foil pieces are secured to their underlying plastic containers with four small Kapton tape pieces, one in each corner. Gently peel the tape or cut off the corners of the foil to release the foil from the plastic container.

Codice della classe di stoccaggio

13 - Non Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 2

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable


Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

Ci dispiace, ma al momento non ci sono COA disponibili online per questo prodotto.

Se ti serve aiuto, non esitare a contattarci Servizio Clienti

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

From 2-D to 0-D Boron Nitride Materials, The Next Challenge
Stagi L, et al.
Materials, 12(23) (2019)
Piezoelectricity in Monolayer Hexagonal Boron Nitride
Ares P, et al.
Advanced Materials, 32 (2020)

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.