Passa al contenuto
Merck
Tutte le immagini(2)

Key Documents

Altri documenti

546461

Sigma-Aldrich

MDMO-PPV

light-emitting polymer

Sinonimo/i:

MDMO-PPV

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(2)

About This Item

Numero CAS:
177716-59-5
Numero MDL:
MFCD03458070
Codice UNSPSC:
12352103
ID PubChem:
24878898
NACRES:
NA.23

Descrizione

Band gap: 2.2 eV

PM

Mn ~120,000

Solubilità

toluene, xylene, THF, chloroform, chlorobenzene, cyclohexanone: soluble

Fluorescenza

λex 485 nm; λem 555 nm in toluene

Energia dell’orbitale

HOMO -5.4 eV 
LUMO -3.2 eV 

Prestazioni di un dispositivo OPV

ITO/PEDOT:PSS/MDMO-PPV/PC61BM/Al

  • Short-circuit current density (Jsc): 0.96 mA/cm2
  • Open-circuit voltage (Voc): 0.78 V
  • Fill Factor (FF): 0.5
  • Power Conversion Efficiency (PCE): 0.5 %

ITO/PEDOT:PSS/MDMO-PPV:PC61BM (1:4)/LiF/Al
  • Short-circuit current density (Jsc): 5.25 mA/cm2
  • Open-circuit voltage (Voc): 0.82 V
  • Fill Factor (FF): 0.61
  • Power Conversion Efficiency (PCE): 3.3 %

Stringa SMILE

COc1ccc(OCCC(C)CCCC(C)C)cc1C=C

Descrizione generale

MDMO-PPV is a dialkoxy substituted poly(p-phenylenevinylene) (PPV) based conjugating polymer which has long side chains that form flexible films for organic electronics. It is a piezoresistant polymer with HOMO and LUMO orbital positions at 5.4 and 3.4 eV, respectively. MDMO-PPV forms an active layer that can be used in photoconductive and electroluminescent applications. Its processability and film-forming properties are superior to MEH-PPV.

Applicazioni

MDMO-PPV can also be used in the fabrication of bulk heterojunction solar cells(BHJ).
MDMO-PPV can be blended with (6,6 phenyl C61- butyric acid methyl ester) (PCBM), which can be coated on indium tin oxide (ITO) to fabricate polymeric solar cells. It can also be used as a red light emitting polymer (LEP), which can be used in the fabrication of red-green-blue laser-based polymeric membranes.

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 1

1 of 1

Poly(2,5-bis(3-sulfonatopropoxy)-1,4-phenylene, disodium salt-alt-1,4-phenylene) light emitting, fluorescence λem 424 nm in H2O

Sigma-Aldrich

659223

Poly(2,5-bis(3-sulfonatopropoxy)-1,4-phenylene, disodium salt-alt-1,4-phenylene)

Aging of a donor conjugated polymer: Photochemical studies of the degradation of poly [2-methoxy-5-(3?, 7?-dimethyloctyloxy)-1, 4-phenylenevinylene].
Chambon S, et al.
Journal of Polymer Science Part A: Polymer Chemistry, 45(2), 317-331 (2007)
Stress-induced variation of MDMO-PPV film thickness and resistance.
Hou W, et al.
Synthetic Metals, 226(1-3), 113-118 (2017)
Barry C Thompson et al.
Angewandte Chemie (International ed. in English), 47(1), 58-77 (2007-11-29)
Fossil fuel alternatives, such as solar energy, are moving to the forefront in a variety of research fields. Polymer-based organic photovoltaic systems hold the promise for a cost-effective, lightweight solar energy conversion platform, which could benefit from simple solution processing
Influence of the solvent on the crystal structure of PCBM and the efficiency of MDMO-PPV: PCBM `plastic?solar cells
Rispens MT, et al.
Chemical Communications (Cambridge, England), 7(17), 2116-2118 (2003)
Ultrathin, highly flexible and stretchable PLEDs
Nature Photonics, 7, 811-816 (2013)
Visualizza tutti i documenti correlati

Articoli

New Conducting and Semiconducting Polymers for Plastic Electronics

New conducting and semiconducting polymers for plastic electronics

Nanomaterials for Advanced Applications

The union of distinct scientific disciplines is revealing the leading edge of Nanotechnology.

PCBM-Based n-Type Semiconductors

PCBM-based n-type semiconductors - Find p- and n-type organic semiconductors available with PCBM library & properties.

High-Performance Semiconductor Polymers Based on Diketopyrrolopyrrole and Thienothiophene

The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.

Vedi tutto

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.