477060
2-Isocyanatoethyl methacrylate
contains ≤0.1% BHT as inhibitor, 98%
Sinonimo/i:
2-(Methacryloyloxy)ethyl isocyanate, IEM
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Formula condensata:
H2C=C(CH3)CO2CH2CH2NCO
Numero CAS:
Peso molecolare:
155.15
Numero CE:
Numero MDL:
Codice UNSPSC:
12162002
ID PubChem:
NACRES:
NA.23
Prodotti consigliati
Livello qualitativo
Saggio
98%
contiene
≤0.1% BHT as inhibitor
Indice di rifrazione
n20/D 1.45 (lit.)
P. ebollizione
211 °C (lit.)
Punto di fusione
−45 °C (lit.)
Densità
1.098 g/mL at 25 °C (lit.)
Temperatura di conservazione
2-8°C
Stringa SMILE
CC(=C)C(=O)OCCN=C=O
InChI
1S/C7H9NO3/c1-6(2)7(10)11-4-3-8-5-9/h1,3-4H2,2H3
RBQRWNWVPQDTJJ-UHFFFAOYSA-N
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
2-Isocyanatoethyl methacrylate, belongs to the class of monomers known as isocyanate monomers. The presence of the isocyanate functional group in 2-Isocyanatoethyl methacrylate makes it highly reactive. This reactivity allows it to undergo polymerization and form cross-linked networks for the development of polymers with improved mechanical strength, chemical resistance, and adhesion properties. It is also used as a crosslinker in the manufacture of many resins, in electrodeposition, and adhesives, and as a co-monomer in crosslinked polymer polyolstyrene-acrylic resin, which is used in construction products, such as ceramic tile adhesives, fillers, putties, and elastomeric roof coatings.
Applicazioni
2-Isocyanatoethyl methacrylate can be used as:
- A reactive monomer in the synthesis of poly(methyl urethane) acrylate oligomer for UV-curable coatings. By incorporating urethane and acrylate groups into the polymer, it enables the polymer to be utilized in UV-curable coatings, inks, and adhesives.
- An additive in propylene carbonate-based electrolyte to enhance its properties, such as viscosity, conductivity, and stability. This improves the overall performance of the electrolyte and the battery.
- As a modifier in the copolymerization process to prepare a bioprosthetic heart valve, which is used in the application of transcatheter aortic valve replacement.
- A latent cross-linker for adhesive resins and coatings.
Avvertenze
Danger
Indicazioni di pericolo
Classi di pericolo
Acute Tox. 1 Inhalation - Acute Tox. 4 Oral - Eye Dam. 1 - Resp. Sens. 1 - Skin Irrit. 2 - Skin Sens. 1
Codice della classe di stoccaggio
6.1A - Combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
210.2 °F - closed cup
Punto d’infiammabilità (°C)
99 °C - closed cup
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
T Furuzono et al.
Biomaterials, 21(4), 327-333 (2000-02-03)
2-Methacryloyloxyethyl phosphorylcholine (MPC) was grafted onto silk fabric in a two-step heterogeneous system through the vinyl bonds of 2-methacryloyloxyethyl isocyanate (MOI) modified on the fabric. First, habutae silk fabric was modified with the MOI monomer in anhydrous dimethyl sulfoxide using
Spec. Chem. Technol., 29, 765-765 (1984)
Christine Lehmann et al.
PLoS pathogens, 14(5), e1007031-e1007031 (2018-05-17)
Parasite egress from infected erythrocytes and invasion of new red blood cells are essential processes for the exponential asexual replication of the malaria parasite. These two tightly coordinated events take place in less than a minute and are in part
T Konno et al.
Biomaterials, 22(13), 1883-1889 (2001-06-09)
The poly(L-lactic acid) nanoparticles immobilized with 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer, which has excellent blood compatibility, were prepared by a solvent evaporation technique using the water-soluble amphiphilic MPC polymer as an emulsifier and a surface modifier. The diameter and zeta-potential of
Mitsumasa Sudo et al.
Atherosclerosis, 265, 283-291 (2017-07-12)
Glucagon-like peptide-1 (GLP-1) is thought to inhibit development of aortic atherosclerosis and plaque formation. However, whether GLP-1 stabilizes fully developed atherosclerotic plaque or alters the complicated plaque composition remains unclarified. Ten Watanabe heritable hyperlipidemic (WHHL) rabbits were divided into GLP-1
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.