Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

460397

Sigma-Aldrich

Titanium

foil, thickness 0.127 mm, ≥99.99% trace metals basis

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Formula empirica (notazione di Hill):
Ti
Numero CAS:
Peso molecolare:
47.87
Numero CE:
Numero MDL:
Codice UNSPSC:
12141746
ID PubChem:
NACRES:
NA.23

Livello qualitativo

Saggio

≥99.99% trace metals basis

Forma fisica

foil

Temp. autoaccensione

860 °F

Resistività

42.0 μΩ-cm, 20°C

Spessore

0.127 mm

P. eboll.

3287 °C (lit.)

Punto di fusione

1660 °C (lit.)

Densità

4.5 g/mL at 25 °C (lit.)

Stringa SMILE

[Ti]

InChI

1S/Ti
RTAQQCXQSZGOHL-UHFFFAOYSA-N

Quantità

1.5 g = 50 × 50 mm; 6.2 g = 100 × 100 mm

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

nwg

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)


Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 4

1 of 4

Platinum wire, diam. 0.076 mm, ≥99.99% trace metals basis

Sigma-Aldrich

357375

Platinum

Titanium 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

Sigma-Aldrich

305812

Titanium

Zinc foil, thickness 1.0 mm, 99.99% trace metals basis

Sigma-Aldrich

349410

Zinc

Gold foil, thickness 0.025 mm, 99.99% trace metals basis

Sigma-Aldrich

268461

Gold

A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
J H Kim et al.
Journal of nanoscience and nanotechnology, 13(7), 4601-4607 (2013-08-02)
Nanocytalline TiN films were deposited on non-alkali glass and Al substrates by reactive DC magnetron sputtering (DCMS) with an electromagnetic field system (EMF). The microstructure and corrosion resistance of the TiN-coated Al substrates were estimated by X-ray diffraction (XRD), scanning
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
B Subramanian
Journal of nanoscience and nanotechnology, 13(7), 4565-4572 (2013-08-02)
Titanium nitride (TiN)/niobium nitride (NbN) nanostructured multilayer coatings were prepared by DC reactive magnetron sputtering method using the combination of a titanium and niobium target and an Ar-N2 mixture discharge gas on to 316L stainless steel substrates. The coatings showed
R Khataee et al.
Journal of nanoscience and nanotechnology, 13(7), 5109-5114 (2013-08-02)
In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used

Articoli

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.