SN3HA47HH3

Optiscale 囊式过滤器 Polygard -CN 30 µm1/4 in.HB/HB

filtration area 17.7 cm², pore size 30.0 μm

• 别名: Optiscale^®囊式过滤器Polygard^® CN
• 分類程式碼代碼: 23151806
• eCl@ss: 32031610

属性

• 材料: PVDF vent cap; fluoroelastomer FKM seal; polycarbonate ; polypropylene ; polypropylene support
• 品質等級: 400
• 法律遵循: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• 製造商／商標名: OptiScale^®
• 參數: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• 直徑: 6.9 cm (2.7 in.)
• 過濾面積: 17.7 cm²
• 入口接頭直徑: 1/4 in.
• 出口接頭直徑: 1/4 in.
• 雜質: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• 基質: Polygard^®-CN
• 孔徑: 30.0 μm nominal pore size; 30.0 μm pore size
• 輸入: sample type liquid
• 接頭: inlet hose barb; 6 mm (1/4 in.) inlet/outlet hose barb; outlet hose barb

说明

一般說明

Device Configuration: 取样皿滤膜

特點和優勢

Format: Single Layer

其他說明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Appliication: Protein Purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^® 47 Capsulle Filter with Polygard^® CN Media user guide
• Storage Statement: Store in original packaging at room temperature
• Disposal Statement: Dispose of in accordance with applicable federal, state, and local regulations

準備報告

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable

分析報告

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

法律資訊

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany