TRD3D0058

P-LENE 4 polypropylene 3D printing filament

natural, diam. 1.75 mm

• 分類程式碼代碼: 12162002
• NACRES: NA.23

属性

• 環保替代產品特色: Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• 直徑: 1.75 mm
• 重量: 750 geach
• 環保替代類別: Enabling,

说明

一般說明

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to enabling category of greener alternatives and thus aligns with "Design for energy efficiency". P-LENE 4 polypropylene 3D printing dilament is great for high-cycle, low strength applications due to its fatigue resistance, semi flexible and lightweight characteristics. Click here for more information.

P-LENE 4 Polypropylene 3D Printing Filament

• Pure PolyPropylene, keeps up to 95% of the characteristics of an injection molded part.
• Very high mechanical strength and toughness, wear proof and resistant to chemicals.
• Developed specifically for 3d printing: easy to use and an odourless composition.

Material Properties

• Density: 0.9 g/cm3
• H.D.T: 62 °C
• Vicat softening temperature: 107 °C
• Melting point: 132 °C

應用

This product can be used in material extrusion 3D printing technique.

P-LENE 4 Polypropylene 3D Printing Parameters

• Extruder (nozzle) temperature: 245 +/-10 °C
• Bed temperature: 100 +/-10 °C
• Print speed: 60 - 80 mm/s
• Fan: 50-100 %
• Minimum nozzle diameter: 0.3 mm
• Plate materials: LENEPATE

安全信息

• 儲存類別代碼: 11 - Combustible Solids
• 水污染物質分類（WGK）: WGK 3
• 閃點（°F）: Not applicable
• 閃點（°C）: Not applicable