推荐产品
等級
for electronic purposes
品質等級
蒸汽壓力
0.05 mmHg ( 25 °C)
描述
Relative Evaporation rate: <0.02
Hansen Solubility Parameters: SPd = 9.0; SPp = 6.8; SPh = 4.6.
化驗
≥99% (GC)
形狀
liquid
環保替代產品特色
Design for Energy Efficiency
Use of Renewable Feedstocks
Learn more about the Principles of Green Chemistry.
雜質
≤0.05% Acidity (as lactic acid)
≤0.2 wt. % Water (Karl Fischer)
≤1 ppm As, Cr, Cd, Cu, Hg, Mn, Ni, Pb, Zn, trace (each)
蒸發殘留物
≤0.05%
顏色
clear
黏度
32.9 cP(20 °C)
bp
189 °C (initial)
密度
0.996 at 25 °C (specific gravity)
環保替代類別
正在寻找类似产品? 访问 产品对比指南
一般說明
This ElectroGreen® solvent is made of bio-based (corn/beets-derived) safer alternatives to replace synthetic NMP fossil-based solvent with specifications tailored for electronics and energy applications. All our ElectroGreen® solvents line are derived from a renewable resource (verified through C14 ASTMD6866-16 testing). We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. Click here for more information.
This solvent blend consists of Dimethyl sulphoxide 50-70%; N,N-Dimethyloctanamide 20-30%; N,N-Dimethyldecan-1-amide 10-20%.
This solvent blend consists of Dimethyl sulphoxide 50-70%; N,N-Dimethyloctanamide 20-30%; N,N-Dimethyldecan-1-amide 10-20%.
應用
N-Methyl Pyrrolidone (NMP)’s largest use in electronics is in cleaning, surface preparation applications and ink formulations. For coatings formulators looking to replace petroleum-based solvents with a bio-based, sustainable alternative, NMP substitute – type 2, bio-sourced is a solvent blend ideal replacement for NMP in a wide array of ink formulations and cleaning applications.
儲存和穩定性
To ensure low water content, handle under inert conditions. Product should be refrigerated upon receipt.
法律資訊
ElectroGreen is a registered trademark of Merck KGaA, Darmstadt, Germany
訊號詞
Warning
危險聲明
危險分類
Eye Irrit. 2 - Skin Irrit. 2
儲存類別代碼
10 - Combustible liquids
水污染物質分類(WGK)
WGK 3
閃點(°F)
185.0 °F
閃點(°C)
85 °C
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门