推荐产品
形狀
powder
分子量
(Ultra-high molecular weight)
樣品平均尺寸
125 μm
mp
146 °C
轉變溫度
Tm (DSC) 146 °C (at peak)
密度
0.94 g/mL at 25 °C
SMILES 字串
C=C
InChI
1S/C2H4/c1-2/h1-2H2
InChI 密鑰
VGGSQFUCUMXWEO-UHFFFAOYSA-N
正在寻找类似产品? 访问 产品对比指南
應用
可用作不饱和聚酯、环氧化物和其他聚合物的添加剂，以引入 UHMWPE 的独特性质。在工业部件、涂层和磨损表面的使用比例为 10-40%（重量百分比）。
特點和優勢
极性表面基团有助于以化学或物理键键合至基体材料。可提供优越的抗磨性、降低摩擦系数，增强抗扯强度并改善防潮性。相比熔融 UHMWPE，更易处理为粒型。
外觀
制品表面经过氧化，包含酸性基团和羟基基团。
儲存類別代碼
11 - Combustible Solids
水污染物質分類（WGK）
WGK 3
閃點（°F）
Not applicable
閃點（°C）
Not applicable
個人防護裝備
Eyeshields, Gloves, type N95 (US)
其他客户在看
Eliandra Mirlei Rossi et al.
Journal of infection in developing countries, 7(3), 229-234 (2013-03-16)
Contaminated sponges might lead to cross-contamination in kitchens since they can transfer microorganisms to surfaces where microorganisms can survive for hours or days and contaminate food. The main objective of this study was to evaluate the transfer and the survival
Morteza Meftah et al.
The Journal of bone and joint surgery. American volume, 95(13), 1193-1197 (2013-07-05)
Ceramic femoral heads produce less wear of the opposing polyethylene than do metal femoral heads in wear simulation studies. This is a matched-pair analysis of the wear of ceramic and metal femoral heads on conventional polyethylene in uncemented total hip
Ingvild Bostadløkken et al.
Ugeskrift for laeger, 175(13), 891-892 (2013-04-16)
We present a case of a 66-year-old woman who had a total knee arthroplasty. Shortly after surgery a 90° rotation of her polyethylene liner took place. The complication was undiagnosed for 1.5 years. To know this problem and be able
Alicia E Leadford et al.
Pediatrics, 132(1), e128-e134 (2013-06-05)
Hypothermia contributes to neonatal mortality and morbidity, especially in preterm and low birth weight infants in developing countries. Plastic bags covering the trunk and extremities of very low birth weight infants reduces hypothermia. This technique has not been studied in
Kelly M Seymour et al.
Journal of biomechanical engineering, 135(2), 021017-021017 (2013-03-01)
Ultra high molecular weight polyethylene (UHMWPE, or ultra high), a frequently used material in orthopedic joint replacements, is often the cause of joint failure due to wear, fatigue, or fracture. These mechanical failures have been related to ultra high's strength
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门