Saltar al contenido
Merck
Todas las fotos(1)

Key Documents

GE80-6483-56

2-D Quant Kit

Cytiva 80-6483-56

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Código UNSPSC:
41105323
NACRES:
NA.25

caducidad

Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service.

Características

wetted part: no

fabricante / nombre comercial

Cytiva 80-6483-56

envase

pkg of 500 assays

temp. de almacenamiento

2-8°C

Categorías relacionadas

Descripción general

2-D Quant Kit is designed for the accurate determination of protein concentration in samples prepared for electrophoresis techniques such as 2-D electrophoresis, SDS-PAGE, or IEF.

Common spectrophotometric methods of quantitating protein rely either on Coomassie dye binding or protein-catalyzed reduction of cupric (Cu2+) ion to cuprous (Cu+) ion. Dye-binding assays cannot be used in the presence of any reagent that also binds the dye. This includes carrier ampholytes and detergents such as PlusOne CHAPS, SDS, and Triton X-100. Assays that depend on the reduction of cupric ion cannot be used in the presence of reductants such as DTT, or in the presence of reagents that form complexes with cupric ion, such as thiourea or EDTA.

The 2-D Quant Kit procedure works by quantitatively precipitating proteins while leaving interfering substances behind. The assay is based on the specific binding of copper ions to protein. Precipitated proteins are resuspended in a copper-containing solution and unbound copper is measured with a colorimetric agent. The absorbance at 480 nm is inversely related to the protein concentration. The assay has a linear response to protein in the range of 0 to 50 μg and recommended sample volume is 1 to 50 μ.

Características y beneficios

  • Accurately determine protein concentration in the presence of 2% SDS, 1% DTT, 8 M urea, 2 M thiourea, 4% CHAPS, 2% Pharmalyte, and 2% IPG Buffer.
  • Quantitatively precipitates proteins while leaving interfering substances behind.
  • Linear response in the range of 0 to 50 μg protein, with recommended sample volumes of 1 to 50 μ.

Nota de análisis

To view the Certificate of Analysis for this product, please visit www.cytiva.com.

Pictogramas

Environment
GHS09

Palabra de señalización

Danger

Frases de peligro

H314 - H335 - H411

Código de clase de almacenamiento

8B - Non-combustible, corrosive hazardous materials

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Milan O Urban et al.
Frontiers in plant science, 12, 628167-628167 (2021-06-29)
The present study aims to investigate the response of rapeseed microspore-derived embryos (MDE) to osmotic stress at the proteome level. The PEG-induced osmotic stress was studied in the cotyledonary stage of MDE of two genotypes: Cadeli (D) and Viking (V)

Protocolos

Protein Determination using 2-D Quant Kit

2-D Quant Kit from GE Healthcare Lifescience is designed to accurately determine protein concentrations in samples for electrophoresis.

Desalting Samples Using Mini Dialysis Kit

Mini Dialysis Kit from GE Healthcare Lifescience is designed for the dialysis of small sample volumes with minimal handling and sample loss and reduces the pronounced streaking on 2-D gels caused by low-molecular-weight contaminants.

Cleaning Up Samples using 2-D Clean-Up Kit

2-D Clean-Up Kit from GE Healthcare is designed to prepare samples that would otherwise produce poor 2-D results.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico