CWSCF1E0

Milligard^® 1,2/ 0,5 µm nominal, Cartucho

pore size 1.2/0.5 μm, cartridge nominal length 10 in. (25 cm), Code F (double open end w/flat gaskets)

• Sinónimos: Milligard^® Cartridge Filter 10 in. Code F 0.5 µm
• Código UNSPSC: 23151806
• eCl@ss: 27293007

Propiedades

• Materiales: mixed cellulose esters (MCE)
• Nivel de calidad: 400
• cumplimiento norm.: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidad: non-sterile
• Compatibilidad de esterilización: autoclavable compatible; steam-in-place compatible
• Línea del producto: Milligard^®
• Características: hydrophilic
• fabricante / nombre comercial: Milligard^®
• técnicas: prefiltration: suitable
• Longitud: 10 in.
• Anchura: 2.9 in.
• longitud nominal del cartucho: 10 in. (25 cm)
• filtración área: 0.7 m²
• impurezas: <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• extraíbles gravimétricos: ≤50 mg/cartridge
• matriz: Milligard^®
• pore size: 1.2/0.5 μm nominal pore size; 1.2/0.5 μm pore size
• entrada: sample type liquid
• código del cartucho: Code F (double open end w/flat gaskets)

Descripción

Descripción general

Device Configuration: Cartridge

Características y beneficios

Format: Double Layer

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificaciones

Filter Grade: Standard Milligard^® Media

Nota de preparación

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análisis

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Información legal

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany