Saltar al contenido
Merck
Todas las fotos(2)

Documentos clave

Ver Toda la documentación

900208

Sigma-Aldrich

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

greener alternative

dry re-dispersible pellets, high conductivity

Sinónimos:

Orgacon™ DRY5, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Número MDL:
MFCD07371079
Código UNSPSC:
12162002
NACRES:
NA.23

Nivel de calidad

100

Formulario

pellets

características de los productos alternativos más sostenibles

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

resistencia de la lámina

<200 Ω/sq (by addition of 5% diethylene glycol)

categoría alternativa más sostenible

Enabling,

temp. de almacenamiento

2-8°C

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Descripción general

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) (dry re-dispersible pellets) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate)(PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it viable polymer in organic electronics:
  • low band gap
  • good optical properties
  • high conductivity
  • low redox potential
  • easy processing
  • tunable film forming ability

We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.

Aplicación

Orgacon™ DRY5 pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating or ink formulations targeted for different applications requiring high conductivity.
PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs), supercapacitors and other biomedical based sensors.
PEDOT:PSS can be used as the active semiconductor layer in OFETs. It is commonly used as a hole transport layer in OPVs.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

Información legal

Orgacon is a trademark of Agfa-Gevaert N.V.

Pictogramas

Corrosion
GHS05

Palabra de señalización

Danger

Frases de peligro

H314

Clasificaciones de peligro

Eye Dam. 1 - Skin Corr. 1B

Código de clase de almacenamiento

8A - Combustible corrosive hazardous materials

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCQ9260
STBK0255
MKCN5037
STBJ4978
STBH8258

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

High efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen TM, et al.
Applied Physics Letters, 3(14), 7255-7262 (2015)
Functionalized graphene/poly (3, 4-ethylenedioxythiophene): polystyrenesulfonate as counter electrode catalyst for dye-sensitized solar cells
Yue G, et al.
Energy, 54(8), 315-321 (2013)
Stability of the interface between indium-tin-oxide and poly (3, 4-ethylenedioxythiophene)/poly (styrenesulfonate) in polymer light-emitting diodes.
De Jong MP, et al.
Applied Physics Letters, 77(14), 2255-2257 (2000)
Stability of polypyrrole and poly (3, 4-ethylenedioxythiophene) for biosensor application.
Yamato H, et al.
Journal of Electroanalytical Chemistry, 397(1-2), 163-170 (1995)
Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors
Galagan Y, et al.
Energy Technology, 3(8), 834-842 (2015)
Ver todos los artículos relacionados

Artículos

Flexible and Printed Organic Thermoelectrics: Opportunities and Challenges

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

Stretchable Electroluminescent Devices

Dr. Tan and researcher introduce recent trends in Self-healing Soft Electronic Materials and Devices. The emergence of smart, functional SHPs will be highly beneficial to the advancement of the next-generation self-healing soft electronic devices. Autonomously self-healing devices could help to minimize the need for repair or replacement of electronics and machines, potentially reducing the cost of materials and reducing electronic waste.

Nanoparticle-based Zinc Oxide Electron Transport Layers for Printed Organic Photodetectors

Recent progress in the area of solution-processed functional materials has led to the development of a variety of thin-film optoelectronic devices with significant promise in the industrial and consumer electronics fields.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico