739340
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
0.54% in H2O, high-conductivity grade
Sinónimos:
Orgacon™ S305, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Número MDL:
Código UNSPSC:
12352103
Productos recomendados
Formulario
liquid
contiene
1-5% Propan-2-ol
5-10% Diethylene glycol
concentración
0.54% in H2O
resistencia
<200 Ω/sq, >90% visible light transmission (40 μm wet)
índice de refracción
n20/D 1.344
pH
<2.7
viscosidad
<18 cP(22 °C)
densidad
0.983 g/mL at 25 °C
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivityand good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Aplicación
Aqueous formulation of high conductivity grade PEDOT:PSS polymer dispersion suitable for transparent conductive coatings. Includes PEDOT:PSS and surfactants.
Used in ITO-free OPV applications as a highly conductive hole transport layer. Also can be used for optical films, touch pads, touch screen displays, flexible LCDs, and e-paper applications.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
Información legal
Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.
sustituido por
Referencia del producto
Descripción
Precios
Código de clase de almacenamiento
10 - Combustible liquids
Clase de riesgo para el agua (WGK)
WGK 2
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Solar cells made from polymers containing Dithieno [3, 2-b: 2', 3'-d] pyrrole with different side chain lengths
Gong C, et al.
Solar Energy Mat. and Solar Cells, 95(3), 969-973 (2011)
Structure and electronic properties of poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) prepared under ultrasonic irradiation
Posudievsky OYu, et al.
Synthetic Metals, 195, 335-339 (2014)
SURPRISING IMPACT OF SMALL ELECTRIC AND MAGNETIC FIELDS ON CONDUCTING POLYMERS
Epstein AJ, et al.
Polymer Preprints (American Chemical Society, Division of Polymer Chemistry), 48(1), 119-119 (2007)
Mou Pal et al.
Nanoscale research letters, 7(1), 1-1 (2012-01-05)
Uniform, spherical-shaped TiO2:Eu nanoparticles with different doping concentrations have been synthesized through controlled hydrolysis of titanium tetrabutoxide under appropriate pH and temperature in the presence of EuCl3·6H2O. Through air annealing at 500°C for 2 h, the amorphous, as-grown nanoparticles could
Simple casting based fabrication of PEDOT:PSS-PVDF-ionic liquid soft actuators
Simaite A, et al.
SPIE Proc. null
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico