Saltar al contenido
Merck
Todas las fotos(3)

Documentos clave

Ver Toda la documentación

370959

Sigma-Aldrich

Lignin, alkali

Sinónimos:

Lignin, kraft

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(3)

About This Item

Número de CAS:
8068-05-1
Número MDL:
MFCD09039274
Código UNSPSC:
12162002
NACRES:
NA.23

descripción

surface tension 43 mN/m (1% aqueous)

Nivel de calidad

100

Formulario

powder

impurezas

5% moisture

pérdida

13.4 wt. % loss on heating, @ 316°C
3.3 wt. % loss on heating, @ 149°C
5.7 wt. % loss on heating, @ 204°C
8.5 wt. % loss on heating, @ 260°C

pH

6.5 (25 °C, 5%, aqueous solution)

temperatura de transición

sintering point 188 °C

solubilidad

NaOH: 0.05% (warm 5% aquesous)
MEK: partially soluble
benzene: insoluble
dioxane: soluble
ethylene glycol: soluble
hexane: insoluble
methanol: partially soluble

densidad

1.3 g/mL at 25 °C

densidad aparente

23 lb/cu.ft (loose)
32 lb/cu.ft (packed)

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Descripción general

Lignin, alkali is a complex, three dimensional polymer that is also known as kraft lignin that has undergone hydrolytic degradation. It is one of the major components of lignocellulosic materials. Lignin is a major product for second generation bioethanol production and is an impurity in the separation of cellulose from wood.

Aplicación

Lignin, alkali can be used as a surface treatment agent for composites of natural fibers with petroleum based resins. It can be used as a biosorbent for potential applications in removing toxic metal ions from wastewater.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCP5496
MKCG9481
MKCD3898
MKBZ1680V
MKBV5831V

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Adriana L Romero-Olivares et al.
PloS one, 12(6), e0179674-e0179674 (2017-06-18)
Over the long term, soil carbon (C) storage is partly determined by decomposition rate of carbon that is slow to decompose (i.e., recalcitrant C). According to thermodynamic theory, decomposition rates of recalcitrant C might differ from those of non-recalcitrant C
Aiguo Wang et al.
Bioresource technology, 268, 505-513 (2018-08-17)
Maximizing the production of aromatic hydrocarbons from lignin conversion by coupling methane activation without solvent was investigated over Zn-Ga modified zeolite catalyst. The co-loading of Zn and Ga greatly improves lignin conversion, arene yield along with BTEX (i.e., benzene, toluene
Shangxian Xie et al.
Advanced science (Weinheim, Baden-Wurttemberg, Germany), 6(13), 1801980-1801980 (2019-08-06)
Bacterial protein secretion represents a significant challenge in biotechnology, which is essential for the cost-effective production of therapeutics, enzymes, and other functional proteins. Here, it is demonstrated that proteomics-guided engineering of transcription, translation, secretion, and folding of ligninolytic laccase balances
Yong Sik Kim et al.
Biomacromolecules, 11(4), 981-988 (2010-03-02)
Copolymerization of N-isopropylacrylamide (NIPAM) with technical hardwood kraft lignin (HWKL) was achieved by atom transfer radical polymerization (ATRP) using a selectively modified lignin-based macroinitiator. The degree of polymerization (DP) of polyNIPAM graft side chains was affected by varying the ratio
Héctor Rodríguez et al.
Physical chemistry chemical physics : PCCP, 11(46), 10916-10922 (2009-11-20)
We have found that 1-alkyl-3-methylimidazolium chloride ionic liquids (ILs) can form immiscible liquid mixtures with some polyethylene glycols (PEGs). Binary mixtures of 1-ethyl-3-methylimidazolium chloride with PEG of molecular weight 1500, 2000, or 3400 g mol(-1), or of 1-butyl-3-methylimidazolium chloride with
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico