KTGRA10HH1

Aervent^®, 0,2 µm, Opticap^®-XL-Kapsel

Opticap^® XL 10, inlet connection diam. 9/16 in., pore size 0.2 μm, cartridge nominal length 10 in. (25 cm)

• Synonym(e): Aervent KTGR Opticap XL10 Capsule
• UNSPSC-Code: 23151806
• eCl@ss: 32031690

Eigenschaften

• Materialien: PTFE ; polypropylene ; polypropylene housing; polypropylene support; polypropylene vent cap; silicone seal
• Qualitätsniveau: 400
• Sterilität: non-sterile
• Kompatibilität mit Sterilisationsverfahren: autoclavable compatible
• Produktlinie: Opticap^® XL 10
• Leistungsmerkmale: hydrophobic
• Hersteller/Markenname: Aervent^®
• Parameter: ≤24 mL/min nitrogen diffusion at 970 mbar (14 psig) and 23 °C (in 70/30% IPA/water); 1.0 bar max. differential pressure (15 psid) at 80 °C (Forward); 1.0 bar max. inlet pressure (15 psi) at 80 °C (Forward); 2.8 bar max. inlet pressure (40 psi) at 60 °C (Forward); 25 °C max. inlet temp.; 4.1 bar max. differential pressure (60 psid) (Reverse; intermittent); 4.1 bar max. inlet pressure (60 psi) (Reverse; Intermittent); 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward); 80 psig max. inlet pressure
• Methode(n): gas filtration: suitable
• Länge: 13.2 in.
• Breite: 4.2 in.
• Nennlänge Kartusche: 10 in. (25 cm)
• Durchmesser: 10.7 cm (4.2 in.)
• Filtrationsfläche: 0.65 m²
• Durchm. Einlassanschluss: 9/16 in.
• Breite Einlass bis Auslass: 33.3 cm (13.1 in.)
• Durchm. Auslassanschluss: 9/16 in.
• Verunreinigungen: <0.25 EU/mL USP bacterial endotoxins (LAL test, aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤45 mg/cartridge
• Matrix: Aervent^®
• Porengröße: 0.2 μm pore size
• Aufnahme: sample type gas
• Blasenpunkt: ≥1100 mbar (16 psig), nitrogen with 70/30% IPA/water at 23 °C
• Fitting: 1/4 in. drain/vent hose barb (with double O-ring Seal); inlet hose barb; outlet hose barb; (14 mm (9/16 in.) Hose Barb Inlet and Outlet)

Beschreibung

Allgemeine Beschreibung

Device Configuration: Filtereinheit

Leistungsmerkmale und Vorteile

Rated for aerosol retention of a total challenge of 108–1010 plaque forming units of ΦX-174 virus particles at 85 Nm3/h (50 SCFM) per cartridge.

Verpackung

Leicht zu öffnender Doppelbeutel

Qualität

Retains Brevundimonas diminuta liquid aerosol for 21 days at a minimum challenge of 10⁷ CFU/cm²

Angaben zur Herstellung

Dieses Produkt enthält eine PTFE-Membran, die den Richtlinien für „nicht faserabgebende“ Filter gemäß 21 CFR 210.3 (b) (6) entspricht.

Sterilization Method
30 Autoklavenzyklen von 30 min bei 135 °C; nicht inline dampfsterilisierbar

Hinweis zur Analyse

Bacterial Retention
Quantitative Rückhaltung von Brevundimonas diminuta bei einer Mindestbeaufschlagung von 1 x 10⁷ KBE/cm² unter Anwendung der ASTM^® F838-Methode.

HydroCorr: ≤0.75 mL/min @ 2.6 bar (38 psig) per sample

Gravimetric Extractables: after 24 hours in a 70/30% IPA/water mixture at controlled room temperature

Sonstige Hinweise

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Rechtliche Hinweise

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ASTM is a registered trademark of American Society for Testing and Materials

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

Haftungsausschluss

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 2014/68/EU of 15 May 2014. This product has been classified under Article 4 § 3 of the Directive 2014/68/EU. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 4 § 3 of the Directive 2014/68/EU, this product does not bear the CE mark.