Z710865
Silicone membrane liner for Tunair™ shake flask
For 2.5 L flask
Sinonimo/i:
Silicone liner
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
41122104
NACRES:
NB.22
Prodotti consigliati
Materiali
polypropylene
Sterilità
non-sterile
Confezionamento
case of 5
Produttore/marchio commerciale
IBI SS-3017
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Categorie correlate
Descrizione generale
Silicone membrane liner for Tunair™ shake flask consists of five 0.22 m silicone membrane cap linings. The filter lining in the cap assembly is replaced by tweaking the flanges of the inner-closure shell until they separate loose. Then it is pulled apart to remove the used lining. The lining can then be replaced by sandwiching it between two parts of the cap and the cap is snapped back together. While reassembling, ensure the flanges from the inner piece fits into the mated grooves in the outer piece. It is required for the cap assembly to stay intact while using.
Caratteristiche e vantaggi
- Long-lasting unless punctured
- Rinse with water only if visibly soiled.
- Recommends autoclaving cap along with the filter.
Note legali
Tunair is a trademark of IBI Scientific
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.
Se ti serve aiuto, non esitare a contattarci Servizio Clienti
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.