SN12A47FH3

Filtro per capsula Optiscale^® Polygard^® CN

filtration area 17.7 cm², pore size 1.2 μm

• Sinonimo/i: OptiScale Capsule Polygard -CN 1.2 μm 3/4 in. TC-1/4 in. HB
• Codice UNSPSC: 23151806
• eCl@ss: 32031690

Proprietà

• Materiali: PVDF vent cap; fluoroelastomer FKM seal; polycarbonate ; polypropylene ; polypropylene support
• Livello qualitativo: 400
• Conformità normativa: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Produttore/marchio commerciale: OptiScale^®
• Parametri: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• Diametro: 6.9 cm (2.7 in.)
• Superficie filtrante: 17.7 cm²
• Diam. connessione ingresso: 3/4 in.
• Diam. connessione uscita: 1/4 in.
• Impurezze: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Matrice: Polygard^®-CN
• Dimensione pori: 1.2 μm nominal pore size; 1.2 μm pore size
• input: sample type liquid
• Raccordi: inlet sanitary flange; 19 mm (3/4 in.) inlet sanitary flange; outlet hose barb; 6 mm (1/4 in.) outlet hose barb

Descrizione

Descrizione generale

Device Configuration: Capsule

Caratteristiche e vantaggi

Format: Single Layer

Altre note

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Appliication: Protein Purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^® 47 Capsulle Filter with Polygard^® CN Media user guide
• Storage Statement: Store in original packaging at room temperature
• Disposal Statement: Dispose of in accordance with applicable federal, state, and local regulations

Nota sulla preparazione

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable

Risultati analitici

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Note legali

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany