Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

CPAFS8PRM

Milli-Q

Kit: Progard® 3 + Millipak® 100

For use with AFS® 8/8D/16/16D systems (2003 range)

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Codice UNSPSC:
41104212
NACRES:
NB.85

Livello qualitativo

300

Composizione

(Polypropylene and EPDM)

Confezionamento

pkg of 1 kit

Compatibilità

for use with AFS®

Categorie correlate

Descrizione generale

This water purification kit contains Millipak® 100 Bacteria Filter (MPGL10ZW1) and Progard® 3 Pretreatment Pack (PR0G00003).
  • Millipak® filter removes bacteria from pure water before it enters the analyzer.
  • The Progard® Pack pretreats water by removing large particles, organic compounds and free chlorine from tap water.

Applicazioni

  • The filter provides bacteria- and particulate-free water suitable for laboratory use, including clinical analyzers.
  • The pretreatment pack protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.

Caratteristiche e vantaggi

Millipak® 100 filter features:
  • 0.22 μm Durapore® filter membrane for bacteria removal.
  • Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.

Progard® 3 Pretreatment Pack features:
  • Polyphosphate for anti-scaling protection.
  • Silver-impregnated activated carbon filter for free chlorine reduction and bacteriostatic protection.
  • Depth-filtration (0.5 μm) for removal of particles and colloids.

Altre note

Directions for Use

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: General laboratory analysis
  • Intended Use: Water purification
  • Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
  • Storage Statement: Store in a dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Note legali

AFS is a registered trademark of Merck KGaA, Darmstadt, Germany
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

Codice della classe di stoccaggio

11 - Combustible Solids

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.