CN1H71T06

Filtro per cartuccia Polygard^® CN

pore size 10.0 μm, cartridge nominal length 10 in. (25 cm), Code 7 (2-226; O-rings w/locking-tabs)

• Sinonimo/i: Polygard-CN Cartridge Filter 10 in. 10.0 µm Code 7 PTFE-encapsulated Fluoroelastomer
• Codice UNSPSC: 23151806
• eCl@ss: 32031690

Proprietà

• Materiali: PTFE seal; polypropylene
• Livello qualitativo: 400
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Polygard
• Parametri: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• Lunghezza nominale della cartuccia: 10 in. (25 cm)
• Diametro: 7.0 cm (2.75 in.)
• Superficie filtrante: 0.42 m²
• Impurezze: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Estraibili (gravimetria): ≤50 mg
• Dimensione pori: 10.0 μm nominal pore size; 10.0 μm pore size
• input: sample type liquid
• Codice cartuccia: Code 7 (2-226; O-rings w/locking-tabs)

Descrizione

Descrizione generale

Device Configuration: Cartridge

Nota sulla preparazione

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Risultati analitici

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Altre note

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Note legali

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany