CGW9M4S03

Capsule OptiScale matrice Polysep^™ II di grado 2,0/1,2 µm nominale

pore size 2.0/1.2 μm, cartridge nominal length 4 in. (10 cm), Code M (2-118; O-rings)

• Sinonimo/i: Polysep II Cartridge Filter 4 in. 2.0/1.2 μm Code M
• Codice UNSPSC: 23151806
• eCl@ss: 32031610

Proprietà

• Materiali: borosilicate glass fiber (BGF) membrane; mixed cellulose esters (MCE) membrane; polypropylene ; polypropylene support (Spun bonded); silicone seal
• Livello qualitativo: 400
• Conformità normativa: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Sterilità: non-sterile
• Compatibilità con la sterilizzazione: autoclavable compatible; steam-in-place compatible
• Nome Commerciale: Polysep^™
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Polysep^™
• Parametri: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• tecniche: prefiltration: suitable
• Lunghezza: 4 in.
• Larghezza: 2.7 in.
• Lunghezza nominale della cartuccia: 4 in. (10 cm)
• Diametro: 7.1 cm (2.8 in.)
• Superficie filtrante: 0.19 m²
• Impurezze: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Estraibili (gravimetria): ≤56 mg/cartridge
• Matrice: Polysep^™ II
• pore size: 2.0/1.2 μm nominal pore size; 2.0/1.2 μm pore size
• input: sample type liquid
• Codice cartuccia: Code M (2-118; O-rings)

Descrizione

Descrizione generale

Device Configuration: Cartridge

Caratteristiche e vantaggi

Format: Double Layer

Confezionamento

Double Easy-Open bag

Altre note

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota sulla preparazione

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Risultati analitici

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L

Note legali

Polysep is a trademark of Sigma-Aldrich Co. LLC

Informazioni sulla sicurezza

• Pittogrammi: GHS02
• Avvertenze: Danger
• Indicazioni di pericolo: H228
• Consigli di prudenza: P210 - P240 - P241 - P280 - P370 + P378
• Classi di pericolo: Flam. Sol. 1
• Codice della classe di stoccaggio: 4.1B - Flammable solid hazardous materials
• Classe di pericolosità dell'acqua (WGK): WGK 2