256544
Cadmium telluride
powder, <250 μm, deposition grade, ≥99.98% trace metals basis
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Formula empirica (notazione di Hill):
CdTe
Numero CAS:
Peso molecolare:
240.01
Numero CE:
Numero MDL:
Codice UNSPSC:
26111700
ID PubChem:
NACRES:
NA.23
Prodotti consigliati
Grado
deposition grade
Saggio
≥99.98% trace metals basis
Stato
powder
Dimensione particelle
<250 μm
P. ebollizione
1130 °C
Punto di fusione
1092 °C
Densità
6.2 g/mL at 25 °C (lit.)
Stringa SMILE
[Cd]=[Te]
InChI
1S/Cd.Te
RPPBZEBXAAZZJH-UHFFFAOYSA-N
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
CdTe is a photonic material. Crystal structure of CdTe is zinc blende structure. 3CdTe is usually an obvious choice for photovoltaic applications because of its; low cost, direct band gap (1.44eV),3 high absorption coefficient, easily doped with p and n type dopants by several preparation techniques. 2
Applicazioni
Cadmium telluride may be used in photovoltaic solar cells as the window layer. CdTe was used in the preparation of an Au/Cu2Te/CdTe/CdS/TCO/glass heterostructure for solar cell.
Confezionamento
Packaged in poly bottles
Avvertenze
Warning
Indicazioni di pericolo
Consigli di prudenza
Classi di pericolo
Acute Tox. 4 Dermal - Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1
Codice della classe di stoccaggio
11 - Combustible Solids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
dust mask type N95 (US), Eyeshields, Gloves
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
Au/Te/CdTe/CdS/TCO/Glass Solar Cells with Obtained by Sol-Gel as TCO
Marquez Marin J, et al.
International Journal of Photoenergy, 2014 (2014)
Ruizheng Liang et al.
Chemical communications (Cambridge, England), 49(10), 969-971 (2012-12-13)
Ordered ultrathin films based on alternate assembly of CdTe QDs and layered double hydroxide monolayers have been fabricated, which can be used as a photoluminescence temperature sensor with dual-parameter signals and high response sensitivity.
Asad Syed et al.
Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy, 106, 41-47 (2013-01-30)
The growing demand for semiconductor [quantum dots (Q-dots)] nanoparticles has fuelled significant research in developing strategies for their synthesis and characterization. They are extensively investigated by the chemical route; on the other hand, use of microbial sources for biosynthesis witnessed
Juan P Monrás et al.
PloS one, 7(11), e48657-e48657 (2012-11-28)
The vast application of fluorescent semiconductor nanoparticles (NPs) or quantum dots (QDs) has prompted the development of new, cheap and safer methods that allow generating QDs with improved biocompatibility. In this context, green or biological QDs production represents a still
Chong Hyun Chang et al.
Nanoscale, 5(4), 1616-1623 (2013-01-22)
A facile electrodeposition technique was utilized to deposit single-walled carbon nanotubes (SWNTs) with cadmium telluride (CdTe) with well-controlled size, density, surface morphology, and composition. By controlling the applied charge, the morphology of these hybrid nanostructures was altered from CdTe nanoparticles
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.