Accéder au contenu
Merck
Toutes les photos(1)

Principaux documents

791903

Sigma-Aldrich

Conductive silver printing ink, resistivity 30 - 35 μΩ-cm

Synonyme(s) :

Dyesol® DYAG350 conductive silver ink, Screen printable silver paste

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(1)

About This Item

Code UNSPSC :
12352103
Nomenclature NACRES :
NA.23

Description

volume resistivity 30 - 35 μΩ-cm at a 180°C cure temperature

Forme

paste (white)

Composition

Solids content, 65-75%

Viscosité

6000-9000 mPa.s (at shear rate of 10 sec-1 at 25°C)

Description générale

Conductive silver printing ink, resistivity 30-35 μΩ-cm, is a combination of polymer coated silver particles and silver-based compounds in an organic medium. It is a low cost conductive ink that can be printed on a variety of substrates like polyester, glass, and indium tin oxide (ITO) which can be cured at 150-180 °C.

Application

Conductive silver inks can be coated in between reduced graphene oxide (rGO) and copper surfaces to stabilize the charge carrying medium which can be used in the fabrication of a thermistor. Laser induced forward transfer (LIFT) may use conductive silver printing inks to print indium tin oxide nanoparticles based thin films for solar cells and organic light emitting diodes (OLEDS) based applications.
This Conductive Silver ink is an economical grade of specially formulated, screen-printable, conductive silver ink which provides good conductivity at low cure temperatures. This conductive silver ink provides low resistance of printed conducting tracks.

This Conductive Silver Printing Ink is comprised of a mixture of pure silver particles and organometallic silver compound in an organic medium. When printed on polyester (PET or PEN) films and then cured at 150 - 180°C, the particles consolidate to form a chemically-welded, continuous silver track to yield low bulk resistivity.

Informations légales

Dyesol is a registered trademark of Greatcell Solar

Pictogrammes

Exclamation markEnvironment
GHS07,GHS09

Mention d'avertissement

Warning

Mentions de danger

H315,H319,H410

Classification des risques

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Skin Irrit. 2

Code de la classe de stockage

10 - Combustible liquids

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

174.2 °F

Point d'éclair (°C)

79 °C

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
MKCH4856
MKCG4433
MKBW2352V
MKBR7126V

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 1

1 of 1

Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT 1 mg/mL

Sigma-Aldrich

792462

Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT

Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications.
Romero FJ, et al.
Sensors and actuators A, Physical, 274(1), 148-154 (2018)
Conductive silver ink printing through the laser-induced forward transfer technique.
Florian C, et al.
Applied Surface Science, 336(1), 304-308 (2015)
Direct ink-jet printing and low temperature conversion of conductive silver patterns.
Smith PJ, et al.
J. Mater. Sci., 41(13), 4153-4158 (2006)
Metal-based inkjet inks for printed electronics.
Kamyshny A, et al.
Open Applied Physics Journal, 4(1), 4153-4158 (2011)

Articles

Reactive Silver Inks for High-Performance Printed Electronics

The ability to pattern conductive electrodes is technologically relevant for several applications, including photovolatics, displays, sensors, and biomedical devices.

Ruthenium-based dyes for Dye-sensitized Solar Cells

Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.

Advancements in the Fabrication of Integrated Organic Electronics

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

Nanoparticle-based Zinc Oxide Electron Transport Layers for Printed Organic Photodetectors

Recent progress in the area of solution-processed functional materials has led to the development of a variety of thin-film optoelectronic devices with significant promise in the industrial and consumer electronics fields.

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique