Direkt zum Inhalt
Merck
Alle Fotos(3)

Key Documents

IPAKGARDH1

Milli-Q

IPAK Gard® 3/5 Pretreatment Cartridge for Hard Water

For Milli-Q® IQ/IX 7003/05, Milli-Q® EQ 7008/16 water systems to protect RO membranes

Synonym(e):

IPAK Gard 03/05 pack for hard water

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(3)

About This Item

UNSPSC-Code:
41104212

Qualitätsniveau

300

Verpackung

units of 1

Hersteller/Markenname

Milli-Q®

Lagerbedingungen

room temperature

cartridge H

39.5 cm (15.5 in.)

Aufnahme

feed water nature tap water (within specifications of the water purification system, but with hardness (as CaCO3) <gt/> 300 ppm)

Kompatibilität

for use with 7003 and 7005 water purification systems
for use with Milli-Q® EQ 7008 and 7016 water purification systems
for use with Milli-Q® IQ 7003 and 7005 water purification systems

Versandbedingung

ambient

Allgemeine Beschreibung

The IPAK Gard® 3/5 pretreatment cartridge for hard water protects the reverse osmosis (RO) membrane by efficiently removing water contaminants such as free chlorine, colloids, particles and minerals from hard water.
Purification technologies include activated carbon for the removal of free chlorine, polyphosphate beads to protect against scaling and precipitates, and a pleated filter for the removal of particulates and colloids. This pretreatment cartridge improves your system′s performance and extends its lifetime.

Anwendung

  • For use with Milli-Q® IQ/IX 7003/05 and EQ 7008/16 systems.
  • Optimally protects RO membranes from free chlorine, colloids, particles and minerals found in hard feed water.
  • Improves system performance and lifetime.

Leistungsmerkmale und Vorteile

  • Pleated filter removes particulates and colloids, and activated carbon block removes free chlorine from hard feed water to ensure RO membrane performance over years.
  • Polyphosphate beads protect against scaling and precipitates.
  • e-Sure tag enables RFID connection with the system, for seamless consumable status monitoring, data management and full traceability.
  • Supplied with a Drain Cap, to remove excess water and reduce the weight of the exhausted cartridge at disposal.
  • 63% of the parts suppliers are ISO 14001 environmental management system certified.

Rechtliche Hinweise

IPAK GARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Analysenzertifikate (COA)

Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.