SN25A47HH3

Optiscale^® Filtro de cápsula Polygard^® CN Durapore

filtration area 17.7 cm², pore size 2.5 μm

• Sinônimo(s): Optiscale Capsule Polygard -CN 2.5 μm1/4 in. HB/HB
• Código UNSPSC: 23151806
• eCl@ss: 32031610

Propriedades

• Materiais: PVDF vent cap; fluoroelastomer FKM seal; polycarbonate ; polypropylene ; polypropylene support
• Nível de qualidade: 400
• conformidade reg.: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• fabricante/nome comercial: OptiScale^®
• Parâmetros: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• Diâmetro: 6.9 cm (2.7 in.)
• área de filtração: 17.7 cm²
• diâm. conexão de entrada: 1/4 in.
• diam. conexão de saída: 1/4 in.
• Impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• matriz: Polygard^®-CN
• tamanho de poro: 2.5 μm nominal pore size; 2.5 μm pore size
• entrada: sample type liquid
• conector: inlet hose barb; 6 mm (1/4 in.) inlet/outlet hose barb; outlet hose barb

Descrição

Descrição geral

Device Configuration: Capsule

Características e benefícios

Format: Single Layer

Outras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Appliication: Protein Purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^® 47 Capsulle Filter with Polygard^® CN Media user guide
• Storage Statement: Store in original packaging at room temperature
• Disposal Statement: Dispose of in accordance with applicable federal, state, and local regulations

Nota de preparo

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable

Nota de análise

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Informações legais

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany