Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos Principais

791903

Sigma-Aldrich

Conductive silver printing ink, resistivity 30 - 35 μΩ-cm

Sinônimo(s):

Dyesol® DYAG350 conductive silver ink, Screen printable silver paste

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Código UNSPSC:
12352103
NACRES:
NA.23

descrição

volume resistivity 30 - 35 μΩ-cm at a 180°C cure temperature

forma

paste (white)

composição

Solids content, 65-75%

viscosidade

6000-9000 mPa.s (at shear rate of 10 sec-1 at 25°C)

Descrição geral

Conductive silver printing ink, resistivity 30-35 μΩ-cm, is a combination of polymer coated silver particles and silver-based compounds in an organic medium. It is a low cost conductive ink that can be printed on a variety of substrates like polyester, glass, and indium tin oxide (ITO) which can be cured at 150-180 °C.

Aplicação

Conductive silver inks can be coated in between reduced graphene oxide (rGO) and copper surfaces to stabilize the charge carrying medium which can be used in the fabrication of a thermistor. Laser induced forward transfer (LIFT) may use conductive silver printing inks to print indium tin oxide nanoparticles based thin films for solar cells and organic light emitting diodes (OLEDS) based applications.
This Conductive Silver ink is an economical grade of specially formulated, screen-printable, conductive silver ink which provides good conductivity at low cure temperatures. This conductive silver ink provides low resistance of printed conducting tracks.

This Conductive Silver Printing Ink is comprised of a mixture of pure silver particles and organometallic silver compound in an organic medium. When printed on polyester (PET or PEN) films and then cured at 150 - 180°C, the particles consolidate to form a chemically-welded, continuous silver track to yield low bulk resistivity.

Informações legais

Dyesol is a registered trademark of Greatcell Solar

Pictogramas

Exclamation markEnvironment
GHS07,GHS09

Palavra indicadora

Warning

Frases de perigo

H315,H319,H410

Classificações de perigo

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Skin Irrit. 2

Código de classe de armazenamento

10 - Combustible liquids

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

174.2 °F

Ponto de fulgor (°C)

79 °C

Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number
MKCH4856
MKCG4433
MKBW2352V
MKBR7126V

Não está vendo a versão correta?

Se precisar de uma versão específica, você pode procurar um certificado específico pelo número do lote ou da remessa.

Pesquise por COA

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 1

1 of 1

Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT 1 mg/mL

Sigma-Aldrich

792462

Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT

Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications.
Romero FJ, et al.
Sensors and actuators A, Physical, 274(1), 148-154 (2018)
Conductive silver ink printing through the laser-induced forward transfer technique.
Florian C, et al.
Applied Surface Science, 336(1), 304-308 (2015)
Direct ink-jet printing and low temperature conversion of conductive silver patterns.
Smith PJ, et al.
J. Mater. Sci., 41(13), 4153-4158 (2006)
Metal-based inkjet inks for printed electronics.
Kamyshny A, et al.
Open Applied Physics Journal, 4(1), 4153-4158 (2011)

Artigos

Reactive Silver Inks for High-Performance Printed Electronics

The ability to pattern conductive electrodes is technologically relevant for several applications, including photovolatics, displays, sensors, and biomedical devices.

High Crystalline, Solution-Processable Organic Field-Effect Transistors

Dr. Chan and researchers highlight flexible transistors are the building blocks of next-generation soft electronics. Among all the reported material systems that can be fabricated by researchers, such as circuits, biosensors, stretchable displays, and others,1–5 small molecular weight organic semiconductors are among the most promising candidates for flexible transistor applications. For these small molecular weight organic semiconductors, the semiconductor forming the conductive channel dominates the device performance.

Ruthenium-based dyes for Dye-sensitized Solar Cells

Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.

Advancements in the Fabrication of Integrated Organic Electronics

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

Ver tudo

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica