Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos

348848

Sigma-Aldrich

Titanium

foil, thickness 0.025 mm, 99.98% trace metals basis

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Fórmula empírica (Notação de Hill):
Ti
Número CAS:
7440-32-6
Peso molecular:
47.87
Número CE:
231-142-3
Número MDL:
MFCD00011264
Código UNSPSC:
12141746
ID de substância PubChem:
24861624
NACRES:
NA.23

Ensaio

99.98% trace metals basis

forma

foil

temperatura de autoignição

860 °F

resistividade

42.0 μΩ-cm, 20°C

espessura

0.025 mm

pb

3287 °C (lit.)

pf

1660 °C (lit.)

densidade

4.5 g/mL at 25 °C (lit.)

aplicação(ões)

battery manufacturing

cadeia de caracteres SMILES

[Ti]

InChI

1S/Ti

chave InChI

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Categorias relacionadas

Descrição geral

Ti has low thermal and electrical conductivity. It is highly corrosion-resistant and has a high strength to weight ratio. A few angstroms thick layer of titania on the surface of Ti products makes its corrosion resistant.5 Ti foils could be employed as a substrate to grow arrays of hematite nanorods by hydrothermal method. A study reports pressure less sintering of SiC pieces and single crystals to Ti foils at 1500oC. Ti foil may be applied as an interlayer, diffusion bonded during the self joining of Si3N4. Si3N4/Ti-foil/Si3N4.

Aplicação

  • Medical Devices: Due to its biocompatibility, it is widely used in medical applications, such as in joint replacement implants, dental implants, and surgical instruments (Britannica).
  • Corrosion Resistance: Its resistance to corrosion by both water and chemical media leads to its use in chemical processing industries for equipment like heat exchangers and reactors (Royal Society of Chemistry).

Quantidade

280 mg = 50 × 50 mm; 1.1 g = 100 × 100 mm

Código de classe de armazenamento

11 - Combustible Solids

Classe de risco de água (WGK)

nwg

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)

Certificados de análise (COA)

Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 6

1 of 6

Titanium foil, thickness 0.02 mm, size 50 × 50 mm, purity 99.6+%

GF01334708

Titanium

Titanium foil, thickness 0.1 mm, 25 mm diameter, purity 99.6+%

GF05125126

Titanium

Titanium foil, thickness 0.140 mm, size 150 × 150 mm, purity 99.6+%

GF02703596

Titanium

Titanium foil, thickness 2.0 mm, 99.7% trace metals basis

Sigma-Aldrich

369489

Titanium

Titanium foil, thickness 0.1 mm, 10 mm diameter, purity 99.6+%

GF00621122

Titanium

Titanium sheet, thickness 5.0 mm, size 20 × 20 mm, tolerance 0.2

GF84634645

Titanium

Bonding mechanism between silicon carbide and thin foils of reactive metals
Morozumi S, et al.
J. Mater. Sci., 20(11), 3976-3982 (1985)
Joining of silicon nitride with a titanium foil interlayer
Lemus J and Drew RAL
Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, 352, 169-178 (2003)
Large-Scale Porous Hematite Nanorod Arrays: Direct Growth on Titanium Foil and Reversible Lithium Storage.
Song Y et al.
The Journal of Physical Chemistry C, 114(49), 21158-21164 (2010)
J H Kim et al.
Journal of nanoscience and nanotechnology, 13(7), 4601-4607 (2013-08-02)
Nanocytalline TiN films were deposited on non-alkali glass and Al substrates by reactive DC magnetron sputtering (DCMS) with an electromagnetic field system (EMF). The microstructure and corrosion resistance of the TiN-coated Al substrates were estimated by X-ray diffraction (XRD), scanning
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
Exibir todos os documentos relacionados

Artigos

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica