CN5074T06

Filtre à cartouche Polygard^® CN

nominal pore size 5.0 μm, cartridge nominal length × diam. 40 in. (1064.0-1072.0 mm) × 2.75 in. (70 mm)

• Code UNSPSC : 23151806

Propriétés

• Matériaux: polypropylene filter
• Niveau de qualité: 400
• Caractéristiques: hydrophilic
• Fabricant/nom de marque: Polygard
• Paramètres: 4.8 bar max. differential pressure (70 psid) at 20 °C
• cartridge nominal length × diam.: 40 in. (1064.0-1072.0 mm) × 2.75 in. (70 mm)
• Impuretés: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• Extractibles par gravimétrie: ≤10 mg
• Dimension de pores: 5.0 μm nominal pore size; 5.0 μm pore size
• Entrée: sample type liquid
• Code de la cartouche: Code 7 (2-226; O-Ring with locking tab and spear)

Description

Description générale

Polygard^® CN products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^® CN filter media minimizes pressure differentials during the filtration process, and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Notes préparatoires

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles for 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

Remarque sur l'analyse

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <50 mg.

Autres remarques

Directions for Use:

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Informations légales

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany