Accéder au contenu
Merck
Toutes les photos(1)

Documents

348805

Sigma-Aldrich

Titanium

foil, thickness 0.5 mm, 99.99% trace metals basis

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(1)

About This Item

Formule empirique (notation de Hill):
Ti
Numéro CAS:
7440-32-6
Poids moléculaire :
47.87
Numéro CE :
231-142-3
Numéro MDL:
MFCD00011264
Code UNSPSC :
12141746
ID de substance PubChem :
24861620
Nomenclature NACRES :
NA.23

Niveau de qualité

100

Pureté

99.99% trace metals basis

Forme

foil

Température d'inflammation spontanée

860 °F

Résistivité

42.0 μΩ-cm, 20°C

Épaisseur

0.5 mm

Point d'ébullition

3287 °C (lit.)

Pf

1660 °C (lit.)

Densité

4.5 g/mL at 25 °C (lit.)

Application(s)

battery manufacturing

Chaîne SMILES 

[Ti]

InChI

1S/Ti

Clé InChI

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Catégories apparentées

Description générale

Ti has low thermal and electrical conductivity. It is highly corrosion-resistant and has a high strength to weight ratio. A few angstroms thick layer of titania on the surface of Ti products makes its corrosion resistant.5 Ti foils could be employed as a substrate to grow arrays of hematite nanorods by hydrothermal method. A study reports pressure less sintering of SiC pieces and single crystals to Ti foils at 1500oC. Ti foil may be applied as an interlayer, diffusion bonded during the self joining of Si3N4. Si3N4/Ti-foil/Si3N4.

Quantité

25×25 mm (approximately 1.4 g)

Code de la classe de stockage

11 - Combustible Solids

Classe de danger pour l'eau (WGK)

nwg

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Équipement de protection individuelle

Eyeshields, Gloves, type N95 (US)

Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 7

1 of 7

Titanium 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

Sigma-Aldrich

305812

Titanium

Titanium foil, thickness 0.1 mm, 25 mm diameter, purity 99.6+%

GF05125126

Titanium

Titanium mesh, 100x100mm, nominal aperture 4.3mm, wire diameter 1.5mm, 4.4x4.4 wires/inch, open area 94%, platinized diamond mesh

GF29374005

Titanium

Titanium wire, diam. 0.5 mm, 99.99% trace metals basis

Sigma-Aldrich

348864

Titanium

Titanium IRMM®, certified reference material, 0.1 mm foil

IRMM531A

Titanium

Titanium sponge, 3-19 mm, 99.5% trace metals basis

Sigma-Aldrich

268526

Titanium

Molybdenum foil, thickness 1.0 mm, ≥99.9% trace metals basis

Sigma-Aldrich

357200

Molybdenum

Bonding mechanism between silicon carbide and thin foils of reactive metals
Morozumi S, et al.
J. Mater. Sci., 20(11), 3976-3982 (1985)
Joining of silicon nitride with a titanium foil interlayer
Lemus J and Drew RAL
Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, 352, 169-178 (2003)
Large-Scale Porous Hematite Nanorod Arrays: Direct Growth on Titanium Foil and Reversible Lithium Storage.
Song Y et al.
The Journal of Physical Chemistry C, 114(49), 21158-21164 (2010)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
Afficher tous les articles scientifiques apparentés

Articles

Combinatorial Materials Science for Energy Applications

Can there be an effective strategy for finding breakthrough materials, since they are, by definition, unpredictable? One answer is found in Combinatorial Materials Science techniques, which represent a powerful approach to identifying new and unexpected materials.

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique