VPMHKITNB9

Viresolve^® Pro Micro Shield H Kit

• UNSPSC Code: 12161503

Properties

• material: polyethersulfone membrane ((PES)); white PVDF device (molded parts (yellow band))
• Quality Level: 400
• parameter: 4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)
• H × diam. × filtration area: 3.83 cm (1.51 in.) × 3.07 cm (1.21 in.) × 3.1 cm²
• filtration area: 3.1 cm²
• weight: 4 gempty
• impurities: may contain <0.25 EU/mL bacterial endotoxins (LAL test)
• fitting: female Luer-Lok^® inlet (inlet and vent); male Luer outlet (Slip)
• storage temp.: 2-30°C

Description

General description

The Viresolve^® Pro PD kit is ideally suited for performing your evaluation, optimization and scaling studies. Each kit contains 9 Micro devices from one membrane layering combination*, a user guide and certificate of quality. The air vent prevents air locking within the device.* Viresolve^® Pro devices are built with two membrane layers. Each Viresolve^® Pro Micro device is packaged in a blister pack and labeled with the device lot and the top layer membrane lot/roll number

Application

Process development, studies, Viral clearance, evaluations

Features and Benefits

• Small scale devices for process development, optimization and validation studies
• Membrane based adsorptive prefilters to remove protein aggregates and other fouling species
• Nine units per kit (one Membrane lot)

Other Notes

These products are non-fiber releasing filters as defined in 21 CFR 210.3(b).

Legal Information

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany