PCC030C10G
Pellicon® Kapsel mit Ultracel® Membran
pore size 30 kDa, C Screen, 1 m2 manifold with AseptiQuik® G connectors
About This Item
Materialien
EPDM rubber seal
PPO/PS blend housing
TPE seal
cellulose screen (Composite Regenerated)
composite regenerated cellulose (CRC) membrane
epoxy adhesive
epoxy device (Potting, BPA-free)
polyester screen
polypropylene screen
polyurethane adhesive
polyurethane device (Pottin)
Qualitätsniveau
Beschreibung
C Screen, 1 m2 manifold with AseptiQuik® G connectors
Sterilität
sterile; γ-irradiated
Leistungsmerkmale
holdup volume 254 mL (in feed channel)
holdup volume 306 mL (in permeate channel)
Parameter
max. inlet pressure at 75 psi (5.1 bar) and 4-30 °C
max. transmembrane pressure at 50 psi (3.5 bar) and 4-30 °C
4-8 L/min-m2 flow rate
Methode(n)
ultrafiltration: suitable
capsule L × W × H
19.56 cm (7.7 in.) × 34.37 cm (13.53 in.) × 40.46 cm (15.93 in.)
Membranfläche
1 m2
screen H
15.9 in. (40.5 cm)
screen L
7.7 in. (19.6 cm) , Length
screen W
13.5 in. (34.4 cm)
Verunreinigungen
≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m2)
Matrix
Ultracel®
Porengröße
30 kDa
pH-Bereich
2-13
Fitting
inlet/outlet connection (Feed: AseptiQuik® G Connector)
inlet/outlet connection (Permeate: AseptiQuik® G Connector)
inlet/outlet connection (Retentate: AseptiQuik® G Connector)
Lagertemp.
15-25°C
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Verwandte Kategorien
Allgemeine Beschreibung
Pellicon® Capsules are ideal for the filtration of solutions that require single-use capabilities, including:
-Rapid batch turnaround for higher plant productivity
-Lower risks of product cross-contamination
-Self-contained device for increased operator safety
-Process flexibility for multi-product manufacturing facilities
-Optimum use of time and resources from minimal device preparation
Membrane
Pellicon® Capsules with Ultracel membrane are designed for excellent product retention, recovery, and high yields. Ultracel void-free composite membranes combine ultra-low protein binding, low fouling, and organic solvent resistance with superb mechanical strength.
Anwendung
Leistungsmerkmale und Vorteile
- Plug ′n play, holderless design - easy to install, safe to remove
- Gamma Sterilized and preseravtive-free - ready to process in minutes
- True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
- Proven Ultracel® membrane and C screen - high recovery, superior mass transfer, solvent resistance
- Pellicon® TFF proven performance - true linear scalability within Pellicon® TFF families
Verpackung
Kompatibilität
Sonstige Hinweise
- Comprehensive documentation to support qualification, risk assessment and process optimization needs.
- Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
- Convenient 24/7 access to up-to-date product information.
Rechtliche Hinweise
Analysenzertifikate (COA)
Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.