FMLW02500

PTFE-Membranfilter, Porengröße 5,0 μm

Fluoropore^®, filter diam. 25 mm, hydrophobic

• Synonym(e): Fluoropore Membrane Filter
• UNSPSC-Code: 40161507
• NACRES: NB.24

Eigenschaften

• Materialien: PTFE membrane; gridded filter; white filter
• Leistungsmerkmale: hydrophobic
• Hersteller/Markenname: Fluoropore^®
• Parameter: 122 mL/min-cm² water flow rate; 130 °C max. temp.; 6 L/min-cm² air flow rate
• Filterdurchm.: 25 mm
• filter thickness: 150 μm
• Porengröße: 5.0 μm pore size; 85 % porosity
• Blasenpunkt: ≥0.48 bar, air with water at 23 °C

Beschreibung

Allgemeine Beschreibung

Unlike fibrous filter media that trap particles in their matrix, Fluoropore^® (hydrophobic PTFE) membranes collect particles on their surface, which make them ideal candidates for use in airborne particle monitoring applications. This surface collection provides better detection efficiencies and lower FWHM measurements. (FWHM is defined as the full width at half of the maximum height of the P0-218 peak obtained during sampling of room air.)

Choice of Pore Sizes:
Fluoropore membranes are available in 3 μm (FSLW) and 5 μm (FMLW) pore sizes - the smaller pore size provides low FWHM; the larger pore size has very low pressure drop and greater throughput capacity, which minimizes the number of filter changeouts.

Contrasting Backing Material:
The white backing of our FMLW filter is gridded to assist in identifying membrane orientation for the correct installation into sampling devices.

Leistungsmerkmale und Vorteile

• High collection efficiency
• Extremely low pressure drop
• Higher throughput capacity
• Black backing ensures proper orientation

Rechtliche Hinweise

Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany