CN5073S06

Polygard^® CN Kartuschenfilter

nominal pore size 5.0 μm, cartridge nominal length × diam. 30 in. (812.0-820 mm) × 2.75 in. (70 mm)

• UNSPSC-Code: 23151806

Eigenschaften

• Materialien: polypropylene filter
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Polygard
• Parameter: 4.8 bar max. differential pressure (70 psid) at 20 °C
• cartridge nominal length × diam.: 30 in. (812.0-820 mm) × 2.75 in. (70 mm)
• Verunreinigungen: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤10 mg
• Porengröße: 5.0 μm nominal pore size; 5.0 μm pore size
• Aufnahme: sample type liquid
• Kartuschencode: Code 7 (2-226; O-Ring with locking tab and spear)

Beschreibung

Allgemeine Beschreibung

Polygard^® CN products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^® CN filter media minimizes pressure differentials during the filtration process, and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Angaben zur Herstellung

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles for 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

Hinweis zur Analyse

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <50 mg.

Sonstige Hinweise

Directions for Use:

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Rechtliche Hinweise

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany