1.52003
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 25 mm x 3 mm HPLC Column
Synonym(e):
Chromolith® Flash RP-18 endcapped 25-3 HPLC column
About This Item
Empfohlene Produkte
product name
Chromolith® RP-18 endcapped, L × I.D. 25 mm x 3 mm HPLC column
Materialien
PEEK column
Qualitätsniveau
Agentur
suitable for USP L1
Produktlinie
Chromolith®
Leistungsmerkmale
endcapped
Verpackung
1 ea of
Kennzeichnungsgrad
18% Carbon loading
Parameter
200 bar pressure
45 °C max. temp.
Methode(n)
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
Säule L × ID
2.5 cm × 3 mm
Matrix
monolithic silica
Aktive Matrixgruppe
C18 bonding phase
Porengröße
13 nm mesoporosity
2 μm macroporosity
operating pH range
2-7.5
Trenntechnik
reversed phase
Lagertemp.
no temp limit
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Verwandte Kategorien
Allgemeine Beschreibung
Chromolith® Flash RP-18 endcapped 25-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Flash RP-18 endcapped 25-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® Flash RP-18 endcapped 25-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 25 mm length and 3 mm I.D. is the best choice for rapid separations on any HPLC and UHPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Hinweis zur Analyse
Druck: ≤ 10 bar
Trennleistung (Anthracen)
Theoretische Bodenzahl (N/m) (Anthracen): ≥ 80000
Kapazitätsfaktor (Anthracen): 3.3 - 4.3
Tailing (USP): 0.90 - 1.55 %
Rechtliche Hinweise
Analysenzertifikate (COA)
Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Artikel
Monolithic silica HPLC columns enable high-throughput analysis at low back pressure without loss of separation efficiency or peak capacity.
Chromolith® HPLC and UHPLC columns are made from monolithic silica with a bimodal pore structure using sol-gel technology.
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.