1.17363
MAS-100 Atmos® Sampling Head
for use with MAS-100 Atmos®, no. of holes, 300 autoclavable, hole diam. 0.47 mm
Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(1)
About This Item
UNSPSC-Code:
41103403
NACRES:
NA.74
Empfohlene Produkte
Materialien
anodized aluminum head
Agentur
ISO 8573-7:2003
Leistungsmerkmale
no. of holes 300 autoclavable
Hersteller/Markenname
MAS-100 Atmos®
Lochdurchm.
0.47 mm
Anwendung(en)
compressed gas monitoring
cosmetics
food and beverages
pharmaceutical
Kompatibilität
for use with MAS-100 Atmos®
Verwandte Kategorien
Allgemeine Beschreibung
The MAS-100 Atmos® Sampling Head is designed as an accessory for MAS-100 Atmos® Compressed Gas Sampler made from anodized aluminum. It is supplied with a perforated lid for uniform impaction and convenient agar plate usage.
Each perforated lid is provided with a black marking for individual identification and traceability. The type of the head is indicated by a 3-letter code followed by a 6-digit serial number. For the 300 x 0.47 mm perforated lid for MAS-100 Atmos® the type of code is ALA. The same information is included in the 2D bar code.
Furthermore, for easy visual identification the sieve plate is colored in green. Additional marking indicates the correct positioning for opening and closing the lid.
The default flow rate is 100 liter/min (LPM) with an impaction speed of 20 m/s attains a nominal d50 value of 1.1 μm.
An optional perforated lid with 300x0.6mm diameter is available to achieve a d50 of 1.1 μm as well at a pre-selected flow rate of 100 LPM (refer related product below)
Each perforated lid is provided with a black marking for individual identification and traceability. The type of the head is indicated by a 3-letter code followed by a 6-digit serial number. For the 300 x 0.47 mm perforated lid for MAS-100 Atmos® the type of code is ALA. The same information is included in the 2D bar code.
Furthermore, for easy visual identification the sieve plate is colored in green. Additional marking indicates the correct positioning for opening and closing the lid.
The default flow rate is 100 liter/min (LPM) with an impaction speed of 20 m/s attains a nominal d50 value of 1.1 μm.
An optional perforated lid with 300x0.6mm diameter is available to achieve a d50 of 1.1 μm as well at a pre-selected flow rate of 100 LPM (refer related product below)
Anwendung
The MAS-100 Atmos® Sampling head supplied with 300 x 0.47 mm holes perforated lid is used for compressed gas sampling.
Leistungsmerkmale und Vorteile
- traceability by individual black marking incl. 2D bar code
- accuracy of holes allow exchange on the instrument without need for additional calibration.
- compatible with a wide range of disinfectants and autoclavable.
Rechtliche Hinweise
MAS-100 Atmos is a registered trademark of MBV AG
Ähnliches Produkt
Analysenzertifikate (COA)
Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.