The effect of different implant-abutment connections on screw joint stability.

The effect of different implant-abutment connections on screw joint stability.

The Journal of oral implantology (2014-05-02)

Konstantinos X Michalakis, Pasquale Lino Calvani, Sinan Muftu, Argiris Pissiotis, Hiroshi Hirayama

ABSTRACT

Dental implants with an internal connection have been designed to establish a better stress distribution when lateral external forces act on the prosthesis and minimize the forces transmitted to the fastening screw. In the present study, 10 externally and 10 internally hexed implants were tested with a compressive force applied with an Instron Universal machine. Four cycles of loading-unloading were applied to each specimen to achieve displacements of 0.5, 1, 2, and 2.5 mm. The mean loads for the first cycle were 256.70 N for the external connection and 256 N for the internal connection implants. The independent t test did not reveal any significant differences among the 2 tested groups (P = .780). For the second cycle, the mean loads needed for a displacement of 1 mm were 818.19 N and 780.20 N for the external connection and the internal connection implants, respectively. The independent t test revealed significant differences among the 2 tested groups (P < .001). In the third cycle, the mean load values for a 2-mm displacement were 1394.10 N and 1225.00 N. The independent t test revealed significant differences among the 2 tested groups (P < .001). The mean loads for the fourth cycle were 1488.00 N for the external connection and 1029.00 N for the internal connection implants. These loads were required for a displacement of 2.5 mm. The independent t test revealed significant differences among the 2 tested groups (P < .001). The results of this in vitro study suggest that the internal connection design of the examined implant system could not prevent screw loosening during overloading. No implant or prosthesis failure was noticed in either group.

MATERIALS

Product Number

Brand

Product Description

IRMM531B

Titanium, IRMM^®, certified reference material, 0.5 mm foil

IRMM531C

Titanium, IRMM^®, certified reference material, 0.5 mm wire

81512

Supelco

Poly(methyl methacrylate), analytical standard, for GPC, 8,000

03558

Supelco

Poly(methyl methacrylate), analytical standard, for GPC, 2,480,000

81497

Supelco

Poly(methyl methacrylate), analytical standard, for GPC, 10,000

81503

Supelco

Poly(methyl methacrylate), analytical standard, for GPC, 100,000

GF54883581

Titanium, rod, 1000mm, diameter 3.0mm, annealed, 99.6+%

GF16031843

Titanium, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave

GF76772391

Titanium, rod, 100mm, diameter 10mm, annealed, 99.6+%

GF52551222

Titanium, microfoil, disks, 10mm, thinness 0.25μm, specific density 112.6μg/cm², permanent mylar 3.5μm support, 99.6+%

GF25880485

Titanium, tube, 100mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%

GF13959939

Titanium, microfoil, disks, 10mm, thinness 0.5μm, specific density 225.4μg/cm², permanent mylar 3.5μm support, 99.6+%

GF65336700

Titanium, rod, 200mm, diameter 2mm, annealed, 99.6+%

GF87716997

Titanium, rod, 100mm, diameter 16mm, as drawn, 99.99+%

GF06082286

Titanium, microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm², permanent mylar 3.5μm support, 99.6+%

GF03916290

Titanium, rod, 490mm, diameter 2mm, annealed, 99.6+%

GF62977540

Titanium, tube, 200mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%

GF58567067

Titanium, rod, 100mm, diameter 5mm, annealed, 99.6+%

GF62676759

Titanium, rod, 200mm, diameter 2mm, as drawn, 99.99+%

GF41437830

Titanium, tube, 100mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+%

GF03838282

Titanium, rod, 500mm, diameter 1.5mm, annealed, 99.6+%

GF04311638

Titanium, rod, 100mm, diameter 6mm, annealed, 99.6+%

GF48167590

Titanium, tube, 100mm, outside diameter 6.1mm, inside diameter 5.1mm, wall thickness 0.5mm, annealed, 99.6+%

GF25290581

Titanium, tube, 1000mm, outside diameter 25.4mm, inside diameter 23.62mm, wall thickness 0.89mm, annealed, 99.6+%

GF10374678

Titanium, rod, 500mm, diameter 5mm, annealed, 99.6+%

GF20882998

Titanium, rod, 200mm, diameter 5mm, annealed, 99.6+%

GF17705516

Titanium, rod, 200mm, diameter 3.0mm, annealed, 99.6+%

GF65694426

Titanium, tube, 100mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%

GF69259315

Titanium, rod, 500mm, diameter 6mm, annealed, 99.6+%

GF12929744

Titanium, microfoil, disks, 25mm, thinness 0.25μm, specific density 112.6μg/cm², permanent mylar 3.5μm support, 99.6+%